Fabrication of Nano-Crystalline Ceramics from Ultra-Fine Ceramics Powders by Using Ultra-High Isostatic Pressing.
نویسندگان
چکیده
منابع مشابه
Ultra High Temperature Ceramics: Densification, Properties and Thermal Stability
Hypersonic flights, re-entry vehicles, and propulsion applications all require new materials that can perform in oxidizing or corrosive atmospheres at temperatures in excess of 2000°C and sometimes over the course of a long working life. Ultra High Temperature Ceramics (UHTCs) are good candidates to fulfill these requirements. Within this family, the ZrB2 and HfB2 based composites are the most ...
متن کاملUltra-refractory ceramics for high-temperature solar absorbers
It is well known that the efficiency of thermodynamic solar plants increases with the working temperature. At present the main limit in temperature upscaling is the absorber capability to withstand high temperatures. The ideal solar absorber works at high temperatures, has a low thermal emissivity and a high absorptivity in the solar spectral range . The paper reports on the high temperature em...
متن کاملLattice thermal conductivity of ultra high temperature ceramics ZrB2 and HfB2 from atomistic simulations
Atomistic Green-Kubo simulations are performed to evaluate the lattice thermal conductivity for single crystals of the ultra high temperature ceramics ZrB2 and HfB2 for a range of temperatures. Recently developed interatomic potentials are used for these simulations. Heat current correlation functions show rapid oscillations which can be identified with mixed metal-Boron optical phonon modes. A...
متن کاملFabrication of carbon nano-tubes decorated with ultra fine superparamagnetic nano-particles under continuous flow conditions.
Ultra fine (2-3 nm) magnetite (Fe(3)O(4)) nano-particles are uniformly deposited on single-walled carbon nano-tubes (SWCNTs) pre-functionalised with carboxylic acid groups using microwave radiation. The deposition process involves chemical precipitation associated with continuous flow spinning disc processing (SDP), as a rapid, environmentally friendly approach which is readily scalable for lar...
متن کاملUltra-low percolation threshold in ferrite-metal cofired ceramics brings both high permeability and high permittivity
High permeability and high permittivity are hard to be achieved simultaneously, either in single-phased materials or in composite materials, such as ferrite-ferroelectric ceramic composites and ferrite-metal percolative composites. In this work, ultra-low percolation threshold is achieved in NiZnCu ferrite-Ag cofired ceramics, which endows the composite with both high permeability and high perm...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materia Japan
سال: 1994
ISSN: 1340-2625,1884-5843
DOI: 10.2320/materia.33.155