Fabrication of Oriented Polycrystalline Titania Films by Sol-Gel Process
نویسندگان
چکیده
منابع مشابه
Preparation of (Pb,Ba)TiO3 powders and highly oriented thin films by a sol-gel process
Solid solution Pb1-xBaxTiO3, with particular emphasis on Pb0.5Ba0.5TiO3, was prepared using a sol-gel process incorporating lead acetate trihydrate, barium acetate, and titanium isopropoxide as precursors, acetylacetone (2,4 pentanedione) as a chelating agent, and ethylene glycol as a solvent. The synthesis procedure was optimized by systematically varying acetylacetone: Ti and H2O:Ti molar rat...
متن کاملNano-structured ZnO films by sol-gel process
Thin films of ZnO grown by sol-gel spin method using two different precursors viz. zinc nitrate and zinc acetate have been characterized for their crystalline nature and associated nanostructures. In some cases, the films consist of nanostructures in the form of nanocrystals and nanoneedles of dimensions in the range 15-60 nm. A comparison between the physical characterization and the nanostruc...
متن کاملSynthesis and Characterization of Nanocomposite Films with a Titania Glass Matrix by the Sol±gel Route
Films of thickness 3 mm containing nanosized metal particles of iron, nickel and copper respectively were grown on a Corning glass slide using a sol-gel technique. The particle sizes had values in the range 6.8 to 20.1 nm. Optical absorption characteristics of different specimens were studied over the wavelength range 230 to 830 nm. An absorption maximum was observed at wavelength varying from ...
متن کاملPreparation and Characterization of WO3 Electrochromic Films Obtained by the Sol-Gel Process
Tungsten trioxide (WO3) films have been coated on indium thin oxide (ITO) conductive glass substrate, using aqueous solution of peroxotungstic acid (PTA) by the sol-gel dip coating method. X-ray diffractometery (XRD) analysis confirmed monoclinic and triclinic structure for the film and powdered WO3 respectively. Fourier transforms infrared spectroscopy (FT-IR) exhibit...
متن کاملThe production of Ceramic Thin Films by Sol-Gel Method
The purpose of this work was to production of ceramic thin films by using of Sol-Gel process. For this purpose deposition of SiO2 on substrates of soda-lime glasses has been carried out. Coating treatments on prepared specimen were conducted in a Sol solution by means of dipping at various times. After drying and performing appropriate heat treatment on each sample, the thickness of coated laye...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Association, Japan
سال: 1987
ISSN: 1884-2127,0009-0255
DOI: 10.2109/jcersj1950.95.1108_1207