Fabrication of Piezoelectric PVDF/PAR Composites Using a Sheath-Core Fiber Method
نویسندگان
چکیده
منابع مشابه
Development of Micro Aerial Vehicle using Piezoelectric Fiber Composites
Recently, flapping robots are noticed by many researchers, and many challenges are being made toward the realization of flight motions like insects, birds and so on. The purpose of this work is to develop flapping robots using a new type of piezoelectric material, that is, piezoelectric fiber composites. By using the composites, actuating fibers and sensing fibers can be embedded into a wing as...
متن کاملFABRICATION OF PIEZOELECTRIC CERAMlClPOLYMER COMPOSITES BY INJECTION MOLDING
Research at the Materials Research Laboratory, Pennsylvania State University has demonstrated the potential for improving hydrophone performance using piezoelectric ceramic/polymer composites. As part of an ONR-funded initiative to develop cost-effective manufacturing technology for these composites, Materials Systems is pursuing an injection molding ceramic fabrication approach. This paper bri...
متن کاملPlasmonic coupling on dielectric nanowire core-metal sheath composites.
We have developed dielectric core/metal sheath nanowire (NW) composites for surface-enhanced Raman scattering (SERS), in which an electroless (EL) Ag plating approach was employed. The NW surface was uniformly covered with a high density of 3D silver islands, having a diameter in the 20-30 nm range and spaced less than approximately 10 nm apart. In comparison with the silver deposition via e-be...
متن کاملbuckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
Fabrication and Testing of Natural Fiber Reinforced Hybrid Composites
Work has been carried out to investigate the flexural properties of composites made by reinforcing banana and pineapple as the new natural fibers into epoxy resin matrix. The natural fibers were extracted by retting and manual process. The composites are fabricated using banana and pineapple fiber reinforcements. Hybrid composites were prepared using banana/pineapple fibers of 0/40, 15/25, 20/2...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymers
سال: 2020
ISSN: 2073-4360
DOI: 10.3390/polym12102214