Fabrication of polyacrylonitrile hollow fiber membranes from ionic liquid solutions
نویسندگان
چکیده
منابع مشابه
Failure Mechanisms of Hollow Fiber Supported Ionic Liquid Membranes
Hollow fiber supported ionic liquid membranes (SILMs) were tested using the bubble point method to investigate potential failure modes, including the maximum transmembrane pressure before loss of the ionic liquid from the support. Porous hollow fiber supports were fabricated with different pore morphologies using Matrimid(®) and Torlon(®) as the polymeric material and 1-hexyl-3-methylimidalzoli...
متن کاملFabrication of Crosslinkable Hollow Fiber Membranes for Pervaporation Dehydration
Integrally-skinned asymmetric Polyetherimide/Poly (vinyl alcohol) (PEI/PVA) hollow fber membranes for pervaporation dehydration were fabricated by non-solvent induced phase inversion. PVA inside the PEI matrix could be crosslinked to provide membrane performance stability during long term operation. The effects of different PEI/PVA blend ratio, external coagulant type and...
متن کاملFabrication and Modification of Thin-Film Composite Hollow Fiber NF Membranes
This study focuses on the preparation and modification of a thin-film composite (TFC) hollow fiber polyamide membrane fabricated by the interfacial polymerization of Piperazine (PIP) and trimesoyl chloride (TMC) on a porous polysulfone substrate. The effects of triethylenetetramine (TETA) and silica nanoparticles (SiO2) contents in the aqueous phase (as the additives) on the morphology and perf...
متن کاملfabrication and modification of thin-film composite hollow fiber nf membranes
this study focuses on the preparation and modification of a thin-film composite (tfc) hollow fiber polyamide membrane fabricated by the interfacial polymerization of piperazine (pip) and trimesoyl chloride (tmc) on a porous polysulfone substrate. the effects of triethylenetetramine (teta) and silica nanoparticles (sio2) contents in the aqueous phase (as the additives) on the morphology and perf...
متن کاملFabrication and Characterization of Polyetherimide Hollow Fiber Membrane Contactor for Carbon Dioxide Stripping from Monoethanolamine Solution
In this research, process asymmetric polyetherimide hollow fiber membranes using ethanol (0, 2 and 4 wt%) as non-solvent additive in the polymer dope via phase inversion method were fabricated. Aqueous solution of 1-methyl-2-pyrrolidine (NMP) (90%) was applied as a bore fluid to avoid inner skin layer formation and water was used as the external coagulant. The morphology of fabricated membranes...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer Chemistry
سال: 2016
ISSN: 1759-9954,1759-9962
DOI: 10.1039/c5py01344e