Fabrication of porous ceramics with controlled pore size by colloidal processing
نویسندگان
چکیده
منابع مشابه
Colloidal Processing of Ceramics
Colloidal processing of ceramics is reviewed with an emphasis on interparticle forces, suspension rheology, consolidation techniques, and drying behavior. Particular attention is given to the scientific concepts that underpin the fabrication of particulate-derived ceramic components. The complex interplay between suspension stability and its structural evolution during colloidal processing is h...
متن کاملProcessing and characterization of porous Ti2AlC with controlled porosity and pore size
In this work, we demonstrate a simple and inexpensive way to fabricate porous Ti2AlC, one of the best studied materials from the MAX phase family, with controlled porosity and pore size. This was achieved by using NaCl as the pore former, which was dissolved after cold pressing but before pressureless sintering at 1400 C. Porous Ti2AlC samples with a volume fraction of porosity ranging from 10 ...
متن کاملFacile and economic method for preparation of nano-colloidal Silica with controlled size and stability
This study is focused on synthesis of nano-colloidal silica via alkaline water glass solution. Sodium ions of water glass were removed by cation exchanging in a resin column to obtain the silicic acid which was titrated to the solution of sodium silicate. Concentration of the colloidal silica and pH value of the solutions were controlled using different concentrations of alkaline sodium silicat...
متن کاملFacile and economic method for preparation of nano-colloidal Silica with controlled size and stability
This study is focused on synthesis of nano-colloidal silica via alkaline water glass solution. Sodium ions of water glass were removed by cation exchanging in a resin column to obtain the silicic acid which was titrated to the solution of sodium silicate. Concentration of the colloidal silica and pH value of the solutions were controlled using different concentrations of alkaline sodium silicat...
متن کاملDevelopment of Porous Ceramics with Bimodal Pore-size Distribution from Single-crystal Apatite Fibers and Its Enhanced Osteoconductivity
INTRODUCTION: In orthopedic surgery, bone grafting has been performed to treat diseases and injuries, such as bone tumor and bone fracture. In general, bone implantation is classified into three types: i) auto-grafting, ii) allografting and iii) artificial-bone grafting. Among these bone implantations, auto-grafting is well-known as a common practice and is harvested from the patient. However, ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science and Technology of Advanced Materials
سال: 2005
ISSN: 1468-6996,1878-5514
DOI: 10.1016/j.stam.2005.07.006