Fabrication of Unidirectional Coir Fiber Reinforced Nonwoven Melt-Blown Glass Fabric Composite by Compression Molding
نویسندگان
چکیده
منابع مشابه
Moisture Diffusion Properties of Fabric Composite (Glass Fiber/Epoxy Resin)
In this study, the effect of hygrothermal conditioning on the moisture diffusion properties of the fabric composite (glass fiber/epoxy resin) was investigated. The water uptake of the specimens conditioned in humid environment at different relative humidities (0, 60 and 96 % r.h) at constant temperature (60°C) was evaluated by weight gain measurements. The moisture diffusion properties of the f...
متن کاملCoir Fiber Reinforced Polypropylene Composite Panel for Automotive Interior Applications
In this study, physical, mechanical, and flammability properties of coconut fiber reinforced polypropylene (PP) composite panels were evaluated. Four levels of the coir fiber content (40, 50, 60, and 70 % based on the composition by weight) were mixed with the PP powder and a coupling agent, 3 wt % maleic anhydride grafted PP (MAPP) powder. The water resistance and the internal bond strength of...
متن کاملOptical Fiber Embedded in Epoxy Glass Unidirectional Fiber Composite System
We aimed to embed silica optical fibers in composites (epoxy vinyl ester matrix reinforced with E-glass unidirectional fibers in mass fraction of 60%) in order to further monitor the robustness of civil engineering structures (such as bridges). A simple system was implemented using two different silica optical fibers (F1-double coating of 172 µm diameter and F2-single coating of 101.8 µm diamet...
متن کاملImportant Dental Fiber-Reinforced Composite Molding Compound Breakthroughs.
Fiber-reinforced composite (FRC) molding compounds with micromechanic requirements for fiber lengths longer than critical length (Lc) are now the most important breakthrough in Dentistry since the amalgam. The Lc is a measure of the minimum perfectly aligned fiber length dimension needed before maximum fiber stress transfer starts to occur within the cured resin [1-3]. Mechanical properties tes...
متن کاملFreeform Extrusion Fabrication of Titanium Fiber Reinforced Bioactive Glass Scaffolds
Although implants made with bioactive glass have shown promising results for bone repair, their application in repairing load-bearing long bones is limited due to their low fracture toughness and fairly fast degradation response in vivo. In this paper, we describe our investigation of freeform extrusion fabrication of silicate based 13-93 bioactive glass scaffolds reinforced with titanium fiber...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Textile Science & Fashion Technology
سال: 2019
ISSN: 2641-192X
DOI: 10.33552/jtsft.2019.04.000582