Fabrication Process and Mechanical Properties of Carbon Nanofiber Reinforced Aluminum Matrix Composites
نویسندگان
چکیده
منابع مشابه
Fabrication of in situ TiC reinforced aluminum matrix composites
In the present work, the room and elevated temperature mechanical behavior of Al/TiC, high-strength Al-Si/TiC and the elevated temperature-resistant Al-Fe(-V-Si)/TiC composites has been evaluated. The microstructural characteristics of ingot metallurgy (IM) or rapid solidification (RS) Al-Si/TiC and Al-Fe(-V-Si)/TiC composites could be thought of as a combination of the related alloy matrix mic...
متن کاملSynthesis and mechanical properties of interconnected carbon nanofiber network reinforced polydimethylsiloxane composites.
Carbon nanofiber (CNF) reinforced elastomer composites with light weight, sustainability of large deformation, chemical stability, corrosion and fatigue resistance, and vibration and noise reduction capability can have positive impact on a wide range of applications. However, this type of composite is still a under studied research area due to the difficulties in material handling and processin...
متن کاملMechanical and Tribological Behavior of Aluminum Alloy LM13 Reinforced with Titanium Dioxide Metal Matrix Composites
In the present research work physical, mechanical and tribological behavior of Aluminum (Al) alloy LM13 reinforced with Nano-sized Titanium Dioxide (TiO2) particulates were fabricated, mechanical and tribological properties were investigated. The amount of nano TiO2 particulates in the composite was added from 0.5% to 2% in 0.5 weight percent (wt %) increments. The Al-LM13-TiO2 Metal Matrix Com...
متن کاملFabrication and Characterization of Cellulosic Nanofiber Reinforced Composites
Environment-friendly “green” nanocomposites were fabricated from a starch-based, dispersion-type biodegradable resin and cellulose nanofibers. The mixture of the dispersion-type biodegradable resin and cellulose nanofibers were blended well by using a mixer and/or a stirrer. Composites were prepared by conventional hot pressing at a constant temperature of 140oC and at pressures from 10 to 50 M...
متن کاملMechanical and rheological properties of carbon nanotube-reinforced polyethylene composites
This paper investigates some mechanical and rheological properties of low density polyethylene (LDPE) composites reinforced by multi-walled carbon nanotubes (MWNTs). It was found that the Young’s modulus and tensile strength of the composites can increase by 89% and 56%, respectively, when the nanotube loading reaches 10 wt%. The curving and coiling of MWNTs play an important role in the enhanc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materia Japan
سال: 2014
ISSN: 1340-2625
DOI: 10.2320/materia.53.427