Factors determining flowability of segregation-free iron powder with lubricant containing wax.
نویسندگان
چکیده
منابع مشابه
Factors Influencing Feed Ingredient Flowability
Animal-based food products play a significant role in the current U.S. diet. In 2003, the total meat consumption per capita was 90.5 kg/year [U.S. Department of Agriculture (USDA) 2005]. Since the U.S. has a high consumption of animal-based food products, the animal feed ingredients are fundamentally important. The ingredients can affect not only the quality of the animal-based food products, b...
متن کاملExperimental Investigation of Metal Powder Compaction without Using Lubricant
The main objective of this work was to design a novel device for compaction of metal powders so that the green parts could be ejected with applying a negligible force and without the need for any lubricant in either an admixed form or applied to the die wall. For this purpose a 40 mm diameter one-piece die was envisaged which would elastically contracted 0.076 mm before compaction and after com...
متن کاملBall indentation on powder beds for assessing powder flowability: Analysis of operation window
Article history: Received 30 September 2016 Received in revised form 5 January 2017 Accepted 21 January 2017 Available online 24 January 2017 The characterisation of bulk behaviour of cohesive powders is very important in processing of particulate solids, e.g. for reliable powder flow out of storage vessels. For filling and dosing of small quantities of powders in capsules and for dispersion in...
متن کاملLubricant Pyrolysis During Sintering of Powder Metallurgy Compacts
The chemistry surrounding the pyrolysis of N,NЈ-ethylenebisstearimide (EBS) compacted with iron powder is described for the first time. Heat treatment is carried out in a 5 vol pct hydrogen atmosphere (balance nitrogen) over the 100 °C to 850 °C range. The exhaust from the furnace is monitored by Fourier transform infrared and dispersive ultraviolet absorption spectroscopy; condensable material...
متن کاملEjection Performance of an Improved Die Wall Lubrication Technology Using Composite Lubricants
A new approach in the method of depositing an external lubricant on the die walls of a powder metallurgy press has been developed which allows the compaction of parts from mixes with no or minimal lubricant content. By heating the die to moderate temperatures (70°C 100°C) and using new composite lubricants, optimum thickness lubricant layers can be deposited allowing the compaction-ejection of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1998
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.45.849