Failure Modes and Effects Analysis (FMEA) for Cataloging: An Application and Evaluation

Failure modes and effects analysis (FMEA) for Gamma Knife radiosurgery

PURPOSE Gamma Knife radiosurgery is a highly precise and accurate treatment technique for treating brain diseases with low risk of serious error that nevertheless could potentially be reduced. We applied the AAPM Task Group 100 recommended failure modes and effects analysis (FMEA) tool to develop a risk-based quality management program for Gamma Knife radiosurgery. METHODS A team consisting o...

Failure Modes and Effects Analysis (FMEA) and Systematic Design

The paper describes recent work to improve the safety process for aero-engine controllers. The role of FMEA is discussed in the context of the safety and certification processes, with reference to ARP 4754 and ARP 4761. Whilst the ARPs' emphasis on top-down hazard-driven approaches is valuable, it is concluded that the role of FMEA should not be down-played. Instead it should be recognized that...

Failure Modes and Effects Analysis (fmea) – an Assessment Tool for Risk Management in Clinical Laboratories

Security Application of Failure Mode and Effect Analysis (FMEA)

Increasingly complex systems lead to an interweaving of security, safety, availability and reliability concerns. Most dependability analysis techniques do not include security aspects. In order to include security, a holistic risk model for systems is needed. In our novel approach, the basic failure cause, failure mode and failure effect model known from FMEA is used as a template for a vulnera...

Application of failure mode and effects analysis (FMEA) to pretreatment phases in tomotherapy

The aim of this paper was the application of the failure mode and effects analysis (FMEA) approach to assess the risks for patients undergoing radiotherapy treatments performed by means of a helical tomotherapy unit. FMEA was applied to the preplanning imaging, volume determination, and treatment planning stages of the tomotherapy process and consisted of three steps: 1) identification of the i...