Failure modes of coatings on steel substrate
نویسندگان
چکیده
منابع مشابه
Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray
Macor coatings on 316 alloys substrates were prepared by plasma spraying. The crystallization temperature, thermal expansion coefficient of mica glass-ceramic were at 900ºC and 40× 10−7/◦C respectively. The microhardness of obtained glass-ceramic coating was 6.8GPa and the coefficient friction was 0.98 .
متن کاملThermal Stability of Phosphate Coatings on Steel
P. Pokorny, M. Novak, L. Mastny Institute of Chemical Technology, Prague, Czech Republic P. Szelag Pragochema Prague, Department of Research of Surface Treatment of Metals, Prague, Czech Republic V. Brozek Institute of Plasma Physics ASCR Prague, Czech Republic The work was validated thermal stability of zinc, manganese and tri-cations phosphate coatings on steel, made from commercial phosphati...
متن کاملPerformance of different organic coatings on steel substrate by accelerated and in atmospheric exposure tests
Organic coatings act as a barrier to a corrosive solution and check the transfer of electrical charge from the corrosive solution. High performance organic paint systems were applied on plain carbon steel substrate with two different primers viz., epoxy Zn phosphate and epoxy Zn rich. Identical intermediate and top coats were applied on them having equal dry film thickness. Both uncontrolled lo...
متن کاملFailure Modes and Flexural Ductility of Steel Moment Connections
1 Associate Research Fellow,Center for Research on Earthquake Engineering (NCREE), Chinese Taiwan 2 Professor, Dept. of Civil Engineering, Taiwan University, Taipei, Chinese Taiwan 3 Assistant Professor, Dept. of Civil and Environmental Engineering, University of Kaohsiung, Kaohsiung, Chinese Taiwan Email: [email protected] ABSTRACT : Ductility is the main attribute of steel moment connections...
متن کاملCharacterization of SiO2-TiO2 Coatings on 316l Stainless Steel Substrates
This paper reports nano-structured SiO2-TiO2 coatings using the sol-gel technique on 316L steel substrates. Nanoindentation, surface analysis and corrosion resistance tests were performed on different samples. The nanomechanical tests allowed to compare uncoated steel samples (Eavg = 193.24 GPa and mean hardness of 2.63 GPa and coated steel samples (Eavg = 287.38 GPa and mean hardness of 5.74 G...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of the Polish Academy of Sciences Technical Sciences
سال: 2016
ISSN: 2300-1917
DOI: 10.1515/bpasts-2016-0027