Fatigue crack growth and probability assessment for transverse TIG welded Aluminum alloy 6013-t4
نویسندگان
چکیده
منابع مشابه
Accelerated Threshold Fatigue Crack Growth Effect – Powder Metallurgy Aluminum Alloy
Fatigue crack growth (FCG) research conducted in the near threshold regime has identified a room temperature creep crack growth damage mechanism for a fine grain powder metallurgy (PM) aluminum alloy (8009). At very low ∆K, an abrupt acceleration in room temperature FCG rate occurs at high stress ratio (R = Kmin/Kmax). The near threshold accelerated FCG rates are exacerbated by increased levels...
متن کاملEnhanced Exponential Fatigue Crack Growth Model for Al-alloy
In the present investigation, an attempt has been made to use “exponential model” in the prediction of fatigue life without integrating the fatigue crack growth rate curve (FCGR). The obtained results are compared with experimental crack growth data obtained for 2024-T351 aluminum alloy for four bending V-Charpy specimens under constant amplitude loading in stress ratio range from 0.1 to 0.3 an...
متن کاملFatigue Crack Growth Monitoring of an Aluminum Joint Structure
The detection, location, and sizing of a fatigue crack emanating from a fastener hole in an aluminum plate is investigated. Two linear arrays of surface mounted piezoelectric disk transducers send and receive ultrasonic guided waves that are transmitted, reflected, and scattered by both the joint geometry and the fatigue crack. A tomography algorithm is used to detect and locate the crack. Ampl...
متن کاملFatigue crack growth in a coarse-grained iron–silicon alloy
The fatigue crack growth in a coarse-grained Fe-2 wt% Si alloy is investigated in considerable detail. At room temperature, the material is quasi-brittle and the failure mode is mixed cleavage. Under a mode-I cyclic loading, the crack can overcome the barrier effect of grain boundaries, which dominates the overall damage evolution. Associated with the geometrically necessary crack front branchi...
متن کاملStress Ratio Effects on Crack Opening Loads and Crack Growth Rates in Aluminum Alloy 2024
Since its founding, NASA has been dedicated to the advancement of aeronautics and space science. The NASA Scientific and Technical Information (STI) Program Office plays a key part in helping NASA maintain this important role. The NASA STI Program Office is operated by Langley Research Center, the lead center for NASA's scientific and technical information. The NASA STI Program Office provides ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Theoretical and Applied Mechanics
سال: 2018
ISSN: 1429-2955
DOI: 10.15632/jtam-pl.56.1.179