Fatigue crack growth near regions with differing stiffness
نویسندگان
چکیده
منابع مشابه
Near-threshold fatigue crack growth in bulk metallic glass composites
A major drawback in using bulk metallic glasses (BMGs) as structural materials is their extremely poor fatigue performance. One way to alleviate this problem is through the composite route, in which second phases are introduced into the glass to arrest crack growth. In this paper, the fatigue crack growth behavior of in situ reinforced BMGs with crystalline dendrites, which are tailored to impa...
متن کاملAnalyses of Fatigue Crack Growth and Closure Near Threshold Conditions for Large-Crack Behavior
A plasticity-induced crack-closure model was used to study fatigue crack growth and closure in thin 2024-T3 aluminum alloy under constant-R and constant-Kmax threshold testing procedures. Two methods of calculating crack-opening stresses were compared. One method was based on contact-K analyses and the other on contact crack-openingdisplacement (COD) analyses. These methods gave nearly identica...
متن کاملSimulation of near-tip crack behaviour and its correlation to fatigue crack growth with a modified strip-yield model
A modified strip-yield model has been developed to simulate the plasticity-induced crack closure under the constant amplitude (CA) and a single overload loading conditions. The paper focuses on the simulation of the near tip crack profiles and stress distributions during the fatigue process. Detailed information on near-tip stress and displacement fields at the maximum load (Pmax), the minimum ...
متن کاملA cohesive model of fatigue crack growth
We investigate the use of cohesive theories of fracture, in conjunction with the explicit resolution of the near-tip plastic fields and the enforcement of closure as a contact constraint, for the purpose of fatiguelife prediction. An important characteristic of the cohesive laws considered here is that they exhibit unloadingreloading hysteresis. This feature has the important consequence of pre...
متن کاملFatigue Crack Growth in Adhesive Joints
Adhesive joining is recognized as a potential enabling technology for a variety of material systems being considered in automotive structures where traditional fastening methods would be inappropriate. Well known examples include fiber reinforced composites and polymers. Additionally in certain circumstances, adhesive bonding of steel structures can provide benefits such as improved stiffness a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Structural Integrity
سال: 2016
ISSN: 2452-3216
DOI: 10.1016/j.prostr.2016.06.375