Fatigue Crack Propagation in an In-Situ Al-Al3Ni Functionally Gradient Material.

Crack Detection In Functionally Graded Beams Using Conjugate Gradient Method

In this paper the conjugate gradient (CG) method is employed for identifying the parameters of crack in a functionally graded beam from natural frequency measurement. The crack is modeled as a massless rotational spring with sectional flexibility. By using the Euler-Bernoulli beam theory on two separate beams respectively and applying the compatibility requirements of the crack, the characteris...

Novel Concept to Detect an Optimum Thixoforming Condition of Al-Al3Ni Functionally Graded Material by Wavelet Analysis for Online Operation

A novel technique to characterize the transition phenomenon from solid to melt of Al-Al₃Ni functionally graded material (FGM) through a wavelet analysis for the development of a thixoforming system is investigated. Identification of an optimum semi-solid condition for thixoforming is necessary not only for the construction of a system but also the fabrication of a near-net-shape product with fi...

Fatigue crack propagation in microcapsule - toughened epoxy

The addition of liquid-filled urea-formaldehyde (UF) microcapsules to an epoxy matrix leads to significant reduction in fatigue crack growth rate and corresponding increase in fatigue life. Mode-I fatigue crack propagation is measured using a tapered doublecantilever beam (TDCB) specimen for a range of microcapsule concentrations and sizes: 0, 5, 10, and 20% by weight and 50, 180, and 460 lm di...

High Temperature Fatigue Crack Propagation in INCONEL718

Fatigue-crack propagation in Nitinol, a shape-memory and superelastic endovascular stent material.

Improving the design and performance of medical stents for implantation in the human body is of current interest. This paper describes a study of fatigue-crack propagation behavior in the superelastic alloy Nitinol. Specifically, the objective of this work was to study the effect of environment on cyclic crack-growth resistance in an approximately 50Ni-50Ti (atom %) alloy and to provide the nec...