Fault Current Interruption in Multiterminal HVDC Networks
نویسندگان
چکیده
منابع مشابه
fault location in power distribution networks using matching algorithm
چکیده رساله/پایان نامه : تاکنون روشهای متعددی در ارتباط با مکان یابی خطا در شبکه انتقال ارائه شده است. استفاده مستقیم از این روشها در شبکه توزیع به دلایلی همچون وجود انشعابهای متعدد، غیر یکنواختی فیدرها (خطوط کابلی، خطوط هوایی، سطح مقطع متفاوت انشعاب ها و تنه اصلی فیدر)، نامتعادلی (عدم جابجا شدگی خطوط، بارهای تکفاز و سه فاز)، ثابت نبودن بار و اندازه گیری مقادیر ولتاژ و جریان فقط در ابتدای...
Fault Current Characterisation in VSC-based HVDC Systems
The DC-side line faults in high-voltage direct-current (HVDC) systems utilising voltage-source converters (VSCs) are a major concern for multi-terminal HVDC systems in which complete isolation of the faulted system is not a viable option. A number of challenges are posed by both pole-to-pole and pole-to-ground faults including the presence of very fast and high amplitude discharge current from ...
متن کاملA New Multiterminal Fault Location Algorithm Embedded in Line Current Differential Relays
Accurate fault location on transmission lines becomes increasingly beneficial by reducing outage times and allowing faster restoration of scarce power system assets back into service. Having natural access to synchronized remote current data, line current differential protection schemes can incorporate multiterminal fault location algorithms, allowing for more accurate fault location compared w...
متن کاملAnalysis of Transient Fault Currents in Multi-Terminal HVDC Networks during Pole-to-Ground Faults
The fault current development in a circuit breaker during a pole-to-ground fault is analyzed for a generic multiterminal HVDC system based on Voltage Source Converters. The paper aims to contribute to the current discussion of which requirements on breaking time and peak current HVDC circuit breakers need to fulfill in such networks either based on OHLs or cables. Therefore, the fault current i...
متن کاملRequirements for Fault Protection in HVDC Grids
Conventional Voltage Source Converters (VSC) cannot interrupt DC fault currents and DC circuit breakers are not yet commercially available for HVDC power ratings. Thus, the protection of VSC-HVDC systems is still an obstacle for the development of this technology. The features of VSC-HVDC systems make them suitable for implementing HVDC grids. Nevertheless, HVDC grids are more complex than poin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Power Delivery
سال: 2016
ISSN: 0885-8977,1937-4208
DOI: 10.1109/tpwrd.2015.2448761