Feasibility of a heterogeneous Fenton membrane reactor containing a Fe-ZSM5 catalyst for pharmaceuticals degradation: Membrane fouling control and long-term stability
نویسندگان
چکیده
منابع مشابه
Membrane Fouling Prevention and Control Strategies in Pulp and Paper Industry Applications: A Review
Membrane separation technologies have recently received much attention, from lab-scale studies to full-scale operations, in the forest industry. However, membrane fouling comprises a signifcant obstacle to their broad application. Thus, to ensure cost-effective operation of membrane separation processes, the improved elucidation of membrane fouling and establishment of e...
متن کاملMembrane Distillation for Water Recovery and Its Fouling Phenomena
The total volume of water on Earth is circa 300 million cubic miles, with close to 98.0% being salt water and the remaining 2.0% fresh water. It has been increasingly more challenging to harvest fresh water from surface water, seawater and even from wastewater due to the combination of factors, viz. burgeoning population growth, rapid industrialization and climate change. Recently, membrane dis...
متن کاملHeterogeneous photo-Fenton degradation of phenolic aqueous solutions over iron-containing SBA-15 catalyst
A novel iron-containing mesostructured material has been successfully tested for the heterogeneous photo-Fenton degradation of phenolic aqueous solutions using near UV-visible irradiation (higher than 313 nm) at room temperature and close to neutral pH. This catalyst is a composite material that contains crystalline hematite particles embedded into the mesostructured SBA-15 matrix in a wide dis...
متن کاملA Novel Porous-Dense Dual-Layer Composite Membrane Reactor with Long-Term Stability
A porous-dense dual-layer composite membrane reactor was proposed. The dual-layer composite membrane composed of dense 0.5 wt % Nb2O5-doped SrCo0.8Fe0.2O3-d (SCFNb) layer and porous Ba0.3Sr0.7Fe0.9Mo0.1O3-d (BSFM) layer was prepared. The stability of SCFNb membrane reactor was improved significantly by the porous-dense dual-layer design philosophy. The porous BSFM surface-coating layer can effe...
متن کاملinvestigating the feasibility of a proposed model for geometric design of deployable arch structures
deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Separation and Purification Technology
سال: 2020
ISSN: 1383-5866
DOI: 10.1016/j.seppur.2019.115920