FEM prediction of welding residual stresses in fibre laser-welded AA 2024-T3 and comparison with experimental measurement
نویسندگان
چکیده
منابع مشابه
Control of Welding Residual Stress for Dissimilar Laser Welded Materials
The most common problem of welding dissimilar metals (DMWs) with respect to residual stresses is the differences in the coefficient of thermal expansion and heat conductivity of the two welded metals. In the present work, a CO2 continuous laser welding process was successfully applied and optimized for joining a dissimilar AISI 316 stainless steel and low carbon steel plates. The Taguchi approa...
متن کاملA Study of Residual Stresses and Microstructure in 2024-T3 Aluminum Friction Stir Butt Welds
Three-dimensional residual stress mapping of an aluminum 2024-T3 arcan specimen, butt-welded by the friction stir technique, was performed by neutron diffraction. Results indicate that the residual stress distribution profiles across the weld region are asymmetric with respect to the weld centerline, with the largest gradients in the measured residual stress components occurring on the advancin...
متن کاملResidual Stresses in Friction Stir Welding
Friction stir welding is an innovative joining process being developed for use in aerospace manufacturing. Like most welding processes there exist problems with post-weld residual stresses and subsequent geometrical distortion. The residual stress-state of a welded component can be modified using suitably applied mechanical tensioning and thus distortion can be reduced or eliminated. In the pre...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Residual Stresses in Butt and Socket Welded Joints
A finite element scheme for simulation of welding residual stresses is presented in this paper. Detailed thermal and residual stress analyses for butt-welded and socket-welded pipes are performed using ANSYS and ABAQUS. The calculated distribution of axial stress and hoop stress at welded joint are validated against experimental results. Furthermore, residual stress relaxation under high amplit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The International Journal of Advanced Manufacturing Technology
سال: 2018
ISSN: 0268-3768,1433-3015
DOI: 10.1007/s00170-017-1548-7