Ferromagnetic shape memory effects in an iron palladium alloy
نویسندگان
چکیده
منابع مشابه
MAGNETOELASTIC COUPLING IN NiMnGa FERROMAGNETIC SHAPE MEMORY ALLOY
Title of Document: MAGNETOELASTIC COUPLING IN NiMnGa FERROMAGNETIC SHAPE MEMORY ALLOY Peng Zhao, Doctor of Philosophy, 2006 Directed By: Professor, Manfred Wuttig, Department of Materials Science and Engineering NiMnGa alloys have attracted extensive attention because their ferromagnetic characteristic provides an additional degree of freedom to control both the shape memory effect and the mult...
متن کاملMicrostructure and precipitates in annealed Co38Ni33Al29 ferromagnetic shape memory alloy
Transmission electron microscopy was performed to investigate the microstructure and precipitates in the annealed Co38Ni33Al29 ferromagnetic shape memory alloy. Apart from the dendritic secondary phase in the austenite matrix, micron-sized (up to 100 lm) fcc-based precipitates with partial c0 L12 ordering and containing none, one or three {111}p parallel twin planes were found. The orientation ...
متن کاملExperimental Study on the Magnetomechanical Characteristics of Ni-Mn-Ga Ferromagnetic Shape Memory Alloy Single Crystals
Magnetic shape memory properties of Ni-Mn-Ga single crystals were characterized by measurement of stress-induced martensite reorientation under constant magnetic fields. Also magnetic field-induced strain as a function of the applied magnetic field under different constant compressive stress levels has been investigated. All the experiments were performed at room temperature in which the sample...
متن کاملShape Memory Properties in Cu-Zn-Al Alloy
In this research a Cu-Zn-Al alloy is produced by melting the raw materials in an electric resistance furnace and then pouring it into a steel mould. The optimum way to achieve the final analysis in the hypo-eutectoid range is determined and the influence of the alloying element, Ti on the grain size and the shape memory properties of the samples are investigated. Solution treatment (done at 850...
متن کاملShape Memory Properties in Cu-Zn-Al Alloy
In this research a Cu-Zn-Al alloy is produced by melting the raw materials in an electric resistance furnace and then pouring it into a steel mould. The optimum way to achieve the final analysis in the hypo-eutectoid range is determined and the influence of the alloying element, Ti on the grain size and the shape memory properties of the samples are investigated. Solution treatment (done at 850...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Mechanics of Materials and Structures
سال: 2007
ISSN: 1559-3959
DOI: 10.2140/jomms.2007.2.505