FGM stainless steel-Ti(C,N) cermets through colloidal processing
نویسندگان
چکیده
منابع مشابه
Air Flow through Woven Stainless Steel Mesh
It was known that a mesh screen placed across an airflow will have an evening effect, distributing both the velocity and pressure across the screen, however this effect had not been quantified and the effect of different mesh geometries was unknown. It was desired to understand the relationship between airflow velocity, the pressure behind the screen and the free hole area of the screen. It was...
متن کاملStainless Steel Type 316Ti
Allegheny Ludlum Type 316Ti (UNS S31635) is a titanium stabilized version of Type 316 molybdenum-bearing austenitic stainless steel. It is also known as DIN/EN designation No. 1.4571. The Type 316 alloys are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Type 304. They also offer higher creep, stress-ru...
متن کاملStainless steel structures in fire
The initial material cost of structural stainless steel is about four times that of structural carbon steel, due largely to the expense of the alloying elements and the relatively low volume of production. Given broadly similar structural performance, additional areas of benefit need to be identified and exploited in order to establish stainless steel as a viable alternative material for constr...
متن کاملEuropean Regulation and Stainless Steel
Directives are addressed to the Governments of the Member States (MS). They stipulate the results to be achieved and the deadline(s), but leave the form of the legislation and the methods to be decided by each of the MS. Regulations are directly applicable and binding in all MS on the date of publication in the Official Journal. There are also Council or Commission Decisions that apply specific...
متن کاملCompressibility of 304 Stainless Steel Powder Metallurgy Materials Reinforced with 304 Short Stainless Steel Fibers
Powder metallurgy (P/M) technique is usually used for manufacturing porous metal materials. However, some P/M materials are limitedly used in engineering for their performance deficiency. A novel 304 stainless steel P/M material was produced by a solid-state sintering of 304 stainless steel powders and 304 short stainless steel fibers, which were alternately laid in layers according to mass rat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Refractory Metals and Hard Materials
سال: 2015
ISSN: 0263-4368
DOI: 10.1016/j.ijrmhm.2014.05.008