Film thickness and wave velocity measurement using reflected laser intensity
نویسندگان
چکیده
منابع مشابه
Altitude measurement using laser beam reflected from water surface
In this paper altitude measurement from water surface using laser beam is presented. Research data indicate that the reflection of infrared waves from water surface is about zero and it is less than 2% for visible radiations. Phase-shift and heterodyne technique was used for the measurement, and the laser beam ( mW p nm 10 , 700 = = l ) was modulated by a sine wave having a fixed frequency....
متن کاملEmission reabsorption laser induced fluorescence (ERLIF) film thickness measurement
This paper presents a unique optical technique that utilizes the reabsorption and emission of two fluorescent dyes to accurately measure film thickness while minimizing errors caused by variations in illumination intensity and surface reflectivity. Combinations of dyes are selected that exhibit a high degree of emission reabsorption and each dye concentration is adjusted to create an optically ...
متن کاملThin Film Thickness Measurement Using Conduction and Infrared Transmission
Many applications in a diverse demographic of engineering fields require knowledge of the thickness of thin films and coatings. An example of some applications for which thin film thickness is critical are semiconductors, optics, and protective coatings. There are various methods for measuring thin film thickness, however, many of them are destructive, or are only capable of measuring thickness...
متن کاملPulse wave velocity measurement
The article deals with the investigation of pulse wave propagation in arteries. A part of work involves also design and realization of devices serving for scanning of pulse wave by reflective photoplethysmography. The work describes a use of microcontroller serving for data flow control, communication and analog signal digitalization using integrated analog to digital converter.
متن کاملDual Emission Laser Induced Fluorescence Technique (delif) for Oil Film Thickness and Temperature Measurement
This paper presents the development and implementation of a Dual Emission Laser Induced Fluorescence (DELIF) technique for the measurement of film thickness and temperature of tribological flows. The technique is based on a ratiometric principle that allows normalization of the fluorescence emission of one dye against the fluorescence emission of a second dye, eliminating undesirable effects of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Brazilian Society of Mechanical Sciences and Engineering
سال: 2006
ISSN: 1678-5878
DOI: 10.1590/s1678-58782006000100003