Finite and Numerical Simulations Applied in Tailor Welded Blank
نویسندگان
چکیده
منابع مشابه
A Novel Approach for Formability Prediction of Tailor Welded Blank
Formability of Tailor Welded Blank (TWB) is an important parameter which limits this kind of blanks usage. A forming criterion for tailor welded blank is presented based on the analytical model in this research. This criterion suggests Limit Strength Ratio (LSR) and Limit Thickness Ratio (LTR) for forming limit of TWB. When thickness ratio or strength ratio in tailor welded blank is greater tha...
متن کاملFinite element analysis of tailor-welded blanks
A typical tailor-welded blank (TWB) is composed of several base metals, which might have di!erent mechanical properties as well as thickness. Moreover, a TWB contains a heat-a!ected zone (HAZ) which has quite di!erent mechanical properties from base materials. The forming behaviors of TWBs have been widely studied since they were "rst developed as a way of using collectible o!al. They are often...
متن کاملOptimum Tailor-welded Blank Design Using Deformation Path Length of Boundary Nodes
In this paper, the optimum shape of Tailor-Welded Blanks (TWB) is investigated. The optimization is performed for two different case studies. The first example is deep drawing of a TWB with dissimilar materials and uniform thicknesses and the next example is deep drawing of a TWB with similar materials and non-uniform thicknesses. The effect of blank optimization on the weld line movement is...
متن کاملoptimum tailor-welded blank design using deformation path length of boundary nodes
in this paper, the optimum shape of tailor-welded blanks (twb) is investigated. the optimization is performed for two different case studies. the first example is deep drawing of a twb with dissimilar materials and uniform thicknesses and the next example is deep drawing of a twb with similar materials and non-uniform thicknesses. the effect of blank optimization on the weld line movement is in...
متن کاملInvestigation on Formability of Tailor-Welded Blanks in Incremental Forming
Steel laser tailor-welded blanks (TWBs) are produced by end-to-end joining of base sheets using different welding methods. In this article, the formability of laser TWBs of St12 and St14 with thicknesses of 1 mm and 1.5 in single point incremental forming process were experimentally and numerically investigated. First, the forming limit wall angle was experimentally determined for each of the b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Global Journal of Researches in Engineering
سال: 2020
ISSN: 2249-4596,0975-5861
DOI: 10.34257/gjreivol20is1pg47