FINITE ELEMENT ANALYSIS OF A FORMING PROCESS, USING STATIC STRUCTURAL (ANSYS) AND ANSYS LS-DYNA
نویسندگان
چکیده
منابع مشابه
Finite Element Limit Load Analysis of Thin-walled Structures by Ansys (implicit), Ls-dyna (explicit) and in Combination
After discussing general properties of implicit Finite Element analysis using ANSYS and explicit analysis using LS-DYNA it is shown when and how quasi-static limit load analyses can be performed by a transient analysis using explicit time integration. Then we focus on the remaining benefits of implicit analysis and how a proper combination of ANSYS and LS-DYNA can be used to prepare the transie...
متن کاملOptimization of Isothermal Hot Rolling Parameters Using Ansys and Ls-dyna
Manufacturers of rolled materials are always striving to reduce the costs associated with production—be they time, material, or waste. This is especially true with the manufacture of nextgeneration particle-reinforced materials, such as those used in high-value automotive components. Process variables such as temperahire, roller speed, and plate dimensions, among others, all affect strength, du...
متن کاملSimulation of Process-Stress Induced Warpage of Silicon Wafers Using ANSYS Finite Element Analysis
Wafers warp. It is important to minimize warpage in order to achieve optimal die yield and potentially prevent future device failure. Although the word warpage is widely used in the literature to represent wafer bow (convex or concave shape), in the real world wafers are often seen into warp into saddle shapes. This complicates the characterization of both the sources of and solutions to warpag...
متن کاملFinite Element Analysis Of Disc Brake By ANSYS Workbench
The brakes must be strong enough to stop the vehicle within a minimum distance in an emergency. The driver must have proper control over the vehicle during emergency braking and vehicle must not skid. The brakes must have good antedate characteristics their effectiveness should not decrease with prolonged application and thus it demand that the cooling of the brakes should be very efficient. Fo...
متن کاملStatic Strength Analysis of Tubular T-Joints Using Ansys
A Finite element analysis has been done using ANSYS, to study the static strength of an offshore tubular T-joint. The strength of T-tubular joints with circular cross section tube chord with circular cross section tube brace is investigated. To determine the joint strength of these T-joint subjected to tension, compression, in -plane bending and out-of-plane bending loading cases have been carr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ANNALS OF THE ORADEA UNIVERSITY. Fascicle of Management and Technological Engineering.
سال: 2010
ISSN: 1583-0691
DOI: 10.15660/auofmte.2010-2.1876