Finite element analysis of advanced bicycle precision brake disk forming technology
نویسندگان
چکیده
منابع مشابه
finite element analysis of automotive disk brake and pad in frictional model contact
the object of this work is to present a study of the thermomechanical behavior of the automobile disc brake for the prediction of their resistance to fatigue. then, a study of purely mechanical dry contact between the disc and pads is developed with a good prediction becomes a major stake for the industrialists while modeling the loading and the boundary conditions around the disc.we used the s...
متن کاملFinite Element Analysis of Automotive Disk Brake and Pad in Frictional Model Contact
The purpose of this work is to present a study of the thermomechanical behavior of the automotive disc brake during the braking phase. The first analysis is performed on the disc-pad model without the presence of thermal properties. Structural performance of the disc-pad model such as deformation and Von-Mises stress is predicted. The case of thermoelasticity on the same model with the inclusio...
متن کاملFinite Element Analysis Of Disc Brake By ANSYS Workbench
The brakes must be strong enough to stop the vehicle within a minimum distance in an emergency. The driver must have proper control over the vehicle during emergency braking and vehicle must not skid. The brakes must have good antedate characteristics their effectiveness should not decrease with prolonged application and thus it demand that the cooling of the brakes should be very efficient. Fo...
متن کاملDetermination of Buckling Limit of Strain in Cold Roll Forming through Finite Element Analysis
In this study, Buckling Limit of Strain (B.L.S.) is introduced as one of the most important limiting factors in cold roll forming process. B.L.S. is calculated by the finite element procedure. Then for two particular processes with existing analysis and experimental results, B.L.S. has been determined and evaluated. LUSAS 12.3 is used for finite element analysis. The results show that when buck...
متن کاملViscoelastic Stress Analysis of Precision Aspherical Glass Lens Forming Process using Finite Element Method
The conventional production of lenses is a rather complicated process. Glass raw material which has been pressed to a rough form has to be processed on both sides in order to obtain a finished precision optical component. There have been recent advances in the optical fabrication techniques such as magnetorheological polishing (MRF), ion beam polishing and single point diamond turning (SPDT), b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2015
ISSN: 2261-236X
DOI: 10.1051/matecconf/20152112004