FINITE ELEMENT ANALYSIS ON SHEAR FAILURE MECHANISMS OF RC SHORT COLUMNS
نویسندگان
چکیده
منابع مشابه
Finite Element Analysis of Reinforced RC Bracket Using CFRP Plates
CFRP composites have unique application qualities such as high resistance and durability to environmental conditions, having relatively low weight and easy to install in strengthening concrete structure elements. The brackets should be strengthen sufficiently if they are not calculated and implemented well. Application of the CFRP is one of the methods for such purposes. The study involves usin...
متن کاملFinite Element Analysis of Square RC Columns Confined by Different Configurations of Transverse Reinforcement
Received: November 11, 2016 Revised: January 26, 2017 Accepted: February 10, 2017 Abstract: Introduction: Square reinforced concrete (RC) columns with the confinement effect of transverse reinforcement perform well in ductility and have been used widely in RC structures. Its behavior is the classic topic of anti-seismic and anti-collapse analysis of RC structures. With the advancement of the fi...
متن کاملFinite Element Analysis for CFST Columns under Blast Loading
The columns of frame structures are the key load-bearing components and the exterior columns are susceptible to attack in terrorist blasts. When subjected to blast loads, the columns would suffer a loss of bearing capacity to a certain extent due to the damage imparted which may lead to their collapse and even cause the progressive collapse of the whole structure . The concrete-filled steel col...
متن کاملan investigation on seismic design indicators of rc columns using finite element analyses
the main cause of structural damage in buildings subjected to seismic actions is lateral drift. in almost all reinforced concrete (rc) structures, whether designed with walls or frames, it is likely to be the code drift limits that control the design drift. the design drift limits and their contribution to damage may be represented indirectly through the material strain limits. the aim of this ...
متن کاملNonlinear Finite Element Modeling of Different Cross-Sectional Shapes of Slender RC Columns Confined with CFRP Wraps
In the present study, non-linear finite element analyses are carried out on the slender reinforced concrete columns wrapped using CFRP composite with different cross-sectional shapes having the same area. Thickness of the CFRP wraps, concrete compressive strength, corner radius, loading condition, slenderness ratio and column size are the main parameters of this study. According to this, four d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 1994
ISSN: 1340-4202,1881-8153
DOI: 10.3130/aijs.59.75_1