Finite Element Correction for Residual Stress Distribution Measured by X-ray Surface Removal Method

Design of Broaching Tool Using Finite Element Method for Achieving the Lowest Residual Tensile Stress in Machining of Ti6Al4V Alloy

The aim of this study, is to use finite element simulation to achieve the optimal geometry of a broaching tool that creates the lowest tensile stress at the machined surface of the Ti6Al4V alloy. It plays a major role in reducing production costs and improves the surface integrity of the machined parts. The type and amount of residual stress determined by the thermal and mechanical loads transm...

Evaluation of different materials used for post construction and stress distribution in the radicular dentin using finite element method

Evaluation of different materials used for post construction and stress distribution in the radicular dentin using finite element method Dr. S. Nokar *- Dr. AS. Mostafavi ** *Assistant Professor of Prosthodontics Dept., Faculty of Dentistry, Tehran University / Medical Sciences. **Resident of Prosthodontics Dept., Faculty of Dentistry, Tehran University / Medical Sciences. Abstract Background a...

Evaluation of Laser-Lok microgrooves on the stress distribution of crestal bone by Finite Element Analysis

Speeding up the Stress Analysis of Hollow Circular FGM Cylinders by Parallel Finite Element Method

In this article, a parallel computer program is implemented, based on Finite Element Method, to speed up the analysis of hollow circular cylinders, made from Functionally Graded Materials (FGMs). FGMs are inhomogeneous materials, which their composition gradually varies over volume. In parallel processing, an algorithm is first divided to independent tasks, which may use individual or shared da...

Nonlinear stress analysis of titanium implants by finite element method.

With use of dental implants on the rise, there is also a tandem increase in the number of implant fracture reports. To the end of investigating the stress occurring in implants, elasticity and plasticity analyses were performed using the finite element method. The following results were obtained: (1) With one-piece type of implants of 3.3 mm diameter, elasticity analysis showed that after apply...