Finite Element Dynamic Analysis Of Non-Uniform Beams On Variable One-Parameter Foundation Subjected To Uniformly Distributed Moving Loads
نویسندگان
چکیده
منابع مشابه
Dynamic Response Analysis of Fractionally Damped Beams Subjected to External Loads using Homotopy Analysis Method
This paper examines the solution of a damped beam equation whose damping characteristics are well-defined by the fractional derivative (FD). Homotopy Analysis Method (HAM) is applied for calculating the dynamic response (DR). Unit step and unit impulse functions are deliberated for this analysis. Acquired results are illustrated to show the movement of the beam under various sets of parameters ...
متن کاملFinite Element Analysis of Buckling of Thin Cylindrical Shell Subjected to Uniform External Pressure
One of the common failure modes of thin cylindrical shell subjected external pressure is buckling. The buckling pressure of these shell structures are dominantly affected by the geometrical imperfections present in the cylindrical shell which are very difficult to alleviate during manufacturing process. In this work, only three types of geometrical imperfection patterns are considered namely (a...
متن کاملA New Finite Element Formulation for Buckling and Free Vibration Analysis of Timoshenko Beams on Variable Elastic Foundation
In this study, the buckling and free vibration of Timoshenko beams resting on variable elastic foundation analyzed by means of a new finite element formulation. The Winkler model has been applied for elastic foundation. A two-node element with four degrees of freedom is suggested for finite element formulation. Displacement and rotational fields are approximated by cubic and quadratic polynomia...
متن کاملUsing Finite Element Method Vibration Analysis of Frame Structure Subjected to Moving Loads
It was purposed to understand the dynamic response of frame which are subjected to moving point loads. The finite element method and numerical time integration method (New mark method) are employed in the vibration analysis. The effect of the speed of the moving load on the dynamic magnification factor which is defined as the ratio of the maximum dynamic displacement at the corresponding node i...
متن کاملFinite Element Analysis of Aluminum Honeycombs Subjected to Dynamic Indentation and Compression Loads
The mechanical behavior of aluminum hexagonal honeycombs subjected to out-of-plane dynamic indentation and compression loads has been investigated numerically using ANSYS/LS-DYNA in this paper. The finite element (FE) models have been verified by previous experimental results in terms of deformation pattern, stress-strain curve, and energy dissipation. The verified FE models have then been used...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Applied Mechanics and Engineering
سال: 2015
ISSN: 1734-4492
DOI: 10.1515/ijame-2015-0046