Finite element method modeling of crankshaft axial impact measurements

Finite element modeling of the human head under baton impact

Purpose: This research will try to predict damage probability and calculate the main stress resulted from baton impacts by finite element (FE) modeling of the human head considering skull texture, brain and cerebrospinal fluid.Materials and Methods: A three dimensional FE model of the skull-brain complex was constructed for simulating the baton impact. The FE analysis was carried out using ANSY...

Modeling of impact damage of sewing machine needle on woven fabric by finite element method

A Proposed Modeling Method in Finite Element Slope Stability Analysis

Limit-equilibrium method (LEM) and finite element method (FEM) with strength reduction method (SRM) techniques are the most widely used analysis tools in slope stability assessment. Recently, researchers have reported that both factor of safety (FOS) values and failure surfaces obtained from LEM and FEM are generally in good agreement, except in some particular cases. In this paper, the FOS and...

Modeling of the Fatigue Life of Fiber Metal Laminates under Low Velocity Impact by Finite Element Method

In this study, first by using the finite element method, fatigue life of fiber metal laminates of Glare type subjected to impact was obtained and the numerical results of the model were compared with the experimental results. With regard to the very good matching between numerical and experimental results, then the results of the finite element model were generalized and expanded, and with usin...

Transient Fluid Flow Modeling in Fractured Aquifer of Sechahoon Iron Mine Using Finite Element Method

Considering the fact that a large volume of iron reserve in the Sechahoon Iron Mine in Yazd Province has located under the water table, it is necessary to conduct a comprehensive study on water flow within the pit and its surroundings. The conceptual model of the aquifer was created using surface and underground geological information compared with water table data of the area of interest. In t...