Finite element model updating of natural fibre reinforced composite structure in structural dynamics
نویسندگان
چکیده
منابع مشابه
Damage Detection in Composite Structures Based on Optical Fibre Strain Sensing and Finite Element Model Updating
A prototype system for condition monitoring of composite structures is described that relies on the on-line measurement of dynamic strains in order to detect any deterioration in performance due to the accumulation of damage. Strain data from both long gauge and point optical fibre sensors are employed to update finite element models of the analysed structures. Together with Bragg grating point...
متن کاملA NEW APPROACH BASED ON FINITE ELEMENT MODEL UPDATING FOR STRUCTURAL DAMAGE IDENTIFICATION
In this study, the finite element model updating was simulated by reducing the stiffness of the members. Due to lack of access to the experimental results, the data obtained from an analytical model were used in the proposed structural damage scenarios. The updating parameters for the studied structures were defined as a reduction coefficient applied to the stiffness of the members. Parameter v...
متن کاملAPPLICATION OF FINITE ELEMENT MODEL UPDATING FOR DAMAGE ASSESSMENT OF SPACE STRUCTURE USING CHARGED SYSTEM SEARCH ALGORITHM
Damage assessment is one of the crucial topics in the operation of structures. Multiplicities of structural elements and joints are the main challenges about damage assessment of space structure. Vibration-based damage evaluation seems to be effective and useful for application in industrial conditions and the low-cost. A method is presented to detect and assess structural damages from changes ...
متن کاملExperimental Study of Masonry Structure Under Impact Loading and Comparing it with Numerical Modeling Results via Finite Element Model Updating
Given the sophisticated nature of the blast phenomenon in relation to structures, it is of significance to accurately investigate the structure behavior under blast loads. Due to its rapid and transient nature, blast loading is one of the most important dynamic loadings on the structures. Since masonry materials are widely used as the partition and bearing walls in the existing and newly-built ...
متن کاملFinite Element Modeling of Buried Glass-reinforced Composite Pipe
Two regional finite element (FE) models of a buried glass-fiber reinforced composite pipe have been developed at the National University of Singapore (NUS). The model replicates an arbitrary site whereby fuel is being transported through the 400 mm diameter line, and comprises of multiple components such as the valve pit, 45 degrees and 90 degrees pipe bends, and a service road consisting of th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2016
ISSN: 2261-236X
DOI: 10.1051/matecconf/20168303007