Finite Element Model Updating of Senyuva Historical Arch Bridge Using Ambient Vibration Tests
نویسندگان
چکیده
منابع مشابه
Finite element model updating of a bowstring-arch railway bridge based on experimental modal parameters
0141-0296/$ see front matter 2012 Elsevier Ltd. A http://dx.doi.org/10.1016/j.engstruct.2012.03.013 ⇑ Corresponding author. Tel.: +351 22 508 1901; fa E-mail addresses: [email protected] (D. Ribeiro), r [email protected] (R. Delgado), [email protected] uni-weimar.de (V. Zabel). This article describes the calibration of the numerical model of a bowstring-arch railway bridge based on modal param...
متن کاملAmbient Vibration Tests of an Arch Dam with Different Reservoir Water Levels: Experimental Results and Comparison with Finite Element Modelling
This paper deals with the ambient vibration tests performed in an arch dam in two different working conditions in order to assess the effect produced by two different reservoir water levels on the structural vibration properties. The study consists of an experimental part and a numerical part. The experimental tests were carried out in two different periods of the year, at the beginning of autu...
متن کاملFinite Element Model Updating of Scale Bridge Model Using Measured Modal Response Data AUTHORS
One of the most promising fields of finite element model updating involves using data obtained from the modal response of a structure to update a finite element model. The University of Central Florida (UCF) has constructed a scale model of a two span bridge. Using an impact hammer and accelerometers mounted on the structure, the first 17 natural frequencies and mode shapes were identified. Usi...
متن کاملDAMAGE IDENTIFICATION OF TRUSSES BY FINITE ELEMENT MODEL UPDATING USING AN ENHANCED LEVENBERG-MARQUARDT ALGORITHM
This paper presents an efficient method for updating the structural finite element model. Model updating is performed through minimizing the difference of recorded acceleration of real damaged structure and hypothetical damaged structure, by updating physical parameters in each phase using iterative process of Levenberg-Marquardt algorithm. This algorithm is based on sensitivity analysis and pr...
متن کاملFinite element model updating of a geared rotor system using particle swarm optimization for condition monitoring
In this paper, condition monitoring of a geared rotor system using finite element (FE) model updating and particle swarm optimization (PSO) method is onsidered. For this purpose, employing experimental data from the geared rotor system, an updated FE model is obtained. The geared rotor system under study consists of two shafts, four bearings, and two gears. To get the experimental data, iezoel...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Baltic Journal of Road and Bridge Engineering
سال: 2009
ISSN: 1822-427X,1822-4288
DOI: 10.3846/1822-427x.2009.4.177-185