Finite Element Modeling of FRP-Strengthened RC Beam under Sustained Load
نویسندگان
چکیده
منابع مشابه
Capacity Assessment of Gld Rc Frames Strengthened with Frp
Many gravity load designed (GLD) reinforced concrete (RC) frames are nowadays located in seismic areas. Different strengthening methodologies have been proposed in the past; an innovative technique based on the use of composites was proposed and validated by an experimental program developed at University of Missouri-Rolla. A theoretical approach for the assessment of the subassemblage capacity...
متن کاملRigid body spring network modeling of the tension stiffening of FRP-strengthened RC members
Tension stiffening behavior of post-cracking concrete is an important phenomenon which has been extensively studied for reinforced concrete structures. Although externally bonded fibre reinforced polymer (FRP) composites are widely used for strengthening existing RC structures, it remains unclear to what extent the tension stiffening of post-cracking concrete is quantitatively influenced by the...
متن کاملAnalytical Modeling on Debonding Failure of Frp-strengthened Rc Flexural Structures
Effective application of FRP to concrete structure is not possible until a fundamental understanding of the mechanics and failure mechanisms of the retrofit system is available. This paper is mainly focused on developing a methodology for predicting the debonding failure caused by intermediate flexural cracks in FRP-strengthened R/C beam. Firstly, based on the strain compatibility, an iterative...
متن کاملModeling of FRP-Strengthened Infill Masonry Structures
This paper presents an analytical approach to describe the behavior and mode of failure of infill masonry structures strengthened with fiber-reinforced polymer (FRP) materials. The approach is used to simulate the response of strengthened infill masonry walls under the effect of out-of-plane uniformly distributed pressure simulating wind pressure. The approach includes a finite element analysis...
متن کاملStructural behaviour of RC beams externally strengthened with FRP sheets under fatigue and monotonic loading
This paper presents experimental research on the fatigue and post-fatigue static behaviour of reinforced concrete beams strengthened with glass or carbon fibre reinforced polymer (FRP) sheets placed either vertically or obliquely. All beams for fatigue tests were subjected to four-point bending for one million cycles with a frequency of 5 Hz. The results show that the FRP sheets can be used to ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Materials Science and Engineering
سال: 2018
ISSN: 1687-8434,1687-8442
DOI: 10.1155/2018/7259424