Finite Element modeling of Microwave-Assisted Hot Press process in a multimode furnace
نویسندگان
چکیده
منابع مشابه
A Proposed Modeling Method in Finite Element Slope Stability Analysis
Limit-equilibrium method (LEM) and finite element method (FEM) with strength reduction method (SRM) techniques are the most widely used analysis tools in slope stability assessment. Recently, researchers have reported that both factor of safety (FOS) values and failure surfaces obtained from LEM and FEM are generally in good agreement, except in some particular cases. In this paper, the FOS and...
متن کاملModeling of Tactile Detection of an Artery in a Soft Tissue by Finite Element Analysis
Nowadays, one of the main problems encountered in minimally invasive surgery and telesurgery is the detection of arteries in tissue. In this study, for the first time, tactile detection of an artery in tissue and distinguishing it from the tumor has been modeled by finite element method. In this modeling, three 2D models of tissue have been created: tissue, tissue including a tumor, and tissue ...
متن کاملThermo-Mechanical Finite Element Modeling of the Friction Drilling Process
Friction drilling uses a rotating conical tool to penetrate the workpiece and create a bushing in a single step without generating chips. This research investigates the threedimensional (3D) finite element modeling (FEM) of large plastic strain and hightemperature work-material deformation in friction drilling. The explicit FEM code with temperature-dependent mechanical and thermal properties, ...
متن کاملFinite element modeling of the human head under baton impact
Purpose: This research will try to predict damage probability and calculate the main stress resulted from baton impacts by finite element (FE) modeling of the human head considering skull texture, brain and cerebrospinal fluid.Materials and Methods: A three dimensional FE model of the skull-brain complex was constructed for simulating the baton impact. The FE analysis was carried out using ANSY...
متن کاملUltra High Temperature Microwave Sintering – Furnace and Process Design
Scale up of microwave sintering for high temperature stable non-oxide ceramics, such as SiC, Si3N4, and dispersion ceramics, like SiC-MoSi2 is still difficult, mainly because of lack of an affordable equipment. For air atmosphere sintering different furnaces were developed, like e.g., gas-microwave hybrid heated tunnel kilns [1] or microwave sintering using an adiabatic casket in tunnel kilns [...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Mathematical Modelling
سال: 2015
ISSN: 0307-904X
DOI: 10.1016/j.apm.2015.03.007