Flash Sintering Samaria-Doped Ceria–Carbon Nanotube Composites
نویسندگان
چکیده
منابع مشابه
Characterization of Multiwalled Carbon Nanotube-Reinforced Hydroxyapatite Composites Consolidated by Spark Plasma Sintering
Pure HA and 1, 3, 5, and 10 vol% multiwalled carbon nanotube- (MWNT-) reinforced hydroxyapatite (HA) were consolidated using a spark plasma sintering (SPS) technique. The relative density of pure HA increased with increasing sintering temperature, but that of the MWNT/HA composite reached almost full density at 900°C, and then decreased with further increases in sintering temperature. The relat...
متن کاملUltrafast-Contactless Flash Sintering using Plasma Electrodes
This paper presents a novel derivative of flash sintering, in which contactless flash sintering (CFS) is achieved using plasma electrodes. In this setup, electrical contact with the sample to be sintered is made by two arc plasma electrodes, one on either side, allowing current to pass through the sample. This opens up the possibility of continuous throughput flash sintering. Preheating, a usua...
متن کامل8YSZ sintering by flash sintering method and evaluation of process parameters
Flash sintering as a new sintering method for sintering of ceramic materials has been studied and effect of various parameter such as flash current density, time of flash and contact paste on properties of flash sintered 8YSZ samples has been investigated. Results showed it is possible to achieve high density in shorter time and lower temperature than conventional sintering methods. Samples cou...
متن کاملCarbon nanotube composites
Carbon nanotubes are molecular-scale tubes of graphitic carbon with outstanding properties. They are among the stiffest and strongest fibres known, with Young’s moduli as high as 1 TPa and tensile strengths of up to 63 GPa. They also have remarkable electronic properties and can be metallic or semiconducting depending on their structure and diameter. There is currently great interest in exploit...
متن کاملCarbon Nanotube Polymer Composites
Figure2 While there are limitless applications for these materials, we are interested in radiation shielding and radiation resistant materials for use in the space industry. Initially, we focused on optically transparent single wall nanotoube (SWNT) polymer composites (2-5). Three different in situ polymerization/sonication methods, heat, light and gamma radiation, were used to produce poly (me...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Ceramics
سال: 2019
ISSN: 2571-6131
DOI: 10.3390/ceramics2010006