Flash spinning of poly (ethylene terephthalate)/ polyethylene blend

Poly(ethylene terephthalate) Film Recycling

Preparation and Properties of Polycaprolactone/Poly (Butylene Terephthalate) Blend

Polycaprolactone (PCL) and poly(butylene terephthalate) (PBT) blend was prepared by melt processing. The PCL/PBT blend showed similar morphology with that of pure PCL.The crystallization temperature of PCL was increased by the incorporation of PBT. It was also observed that the peak height in the DSC thermograms decreased and then disappeared by adding 40 % or more PBT which might be due to...

Chemical Degradation of Poly(Ethylene Terephthalate)

The possibility of converting polyethylene terephthalate (PET) waste into terephthalic acid as a primary material by using different techniques through trans-esterification, with an alcohol and through hydrolysis in basic medium, has been investigated. In addition, utilization of activating agents such as inorganic salts and phase transfer catalysts has been investigated. Mineral water and beve...

Organocatalytic Depolymerization of Poly(ethylene terephthalate)

We describe the organocatalytic depolymerization of poly(ethylene terephthalate) (PET), using a commercially available guanidine catalyst, 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD). Postconsumer PET beverage bottles were used and processed with 1.0 mol % (0.7 wt %) of TBD and excess amount of ethylene glycol (EG) at 190 C for 3.5 hours under atmospheric pressure to give bis(2-hydroxyethyl) tere...

Enzymatic surface modification of poly(ethylene terephthalate).

This study unambiguously confirms hydrolysis using cutinase of the persistent synthetic polymer poly(ethylene terephthalate), the most important synthetic fiber in the textile industry by direct measurement and identification of the different hydrolysis products. In this aqueous heterogeneous system, dissolved cutinase from Fusarium solani pisi acts on different solid poly(ethylene terephthalat...