Flexible thermoplastic composite of Polyvinyl Butyral (PVB) and waste of rigid Polyurethane foam
نویسندگان
چکیده
منابع مشابه
Flexible thermoplastic composite of Polyvinyl Butyral (PVB) and waste of rigid Polyurethane foam
This study reports the preparation and characterization of composites with recycled poly(vinyl butyral) (PVB) and residue of rigid polyurethane foam (PUr), with PUr contents of 20, 35 and 50 wt %, using an extruder equipped with a Maillefer single screw and injection molding. The components of the composites were thermally characterized using differential scanning calorimetry (DSC) and thermogr...
متن کاملWaste Minimization Strategy: Flexible Polyurethane Foam Manufacture
Methylene chloride and CFCs are used as auxiliary blowing agents in the manufacture of flexible polyurethanefoams and are promptly emitted during the manufacturing processes.The concentrationof the auxiliary blowing agent are quite low due to the accepted practice of using large volumes of air to lower the ambient concentration of toxic isocyanates (a key chemical in the urethane reaction seque...
متن کاملNonlinear Optical Properties of Rigid Polyurethane Foam/SiO2 Nanocomposite
Polyurethane closed cell (PUCC)/SiO2 nanocomposites have been prepared by using in situ polymerization approach. The third-order optical nonlinearities of PUCC/SiO2 nanocomposites, dissolved in DMF are characterized by Z-scan technique at the measurement wavelength of 532 nm. The nonlinear refractive (NLR) indices and nonlinear absorption (NLA) coefficients of samples were calculated from close...
متن کاملModeling of Compression Curves of Flexible Polyurethane Foam with Variable Density, Chemical Formulations and Strain Rates
Flexible Polyurethane (PU) foam samples with different densities and chemical formulations were tested in quasi-static stress-strain compression tests. The compression tests were performed using the Lloyd LR5K Plus instrument at fixed compression strain rate of 0.033 s-1 and samples were compressed up to 70% compression strains. All foam samples were tested in the foam rise direction and their ...
متن کاملRelease of CFC-11 from disposal of polyurethane foam waste.
The halocarbon CFC-11 has extensively been used as a blowing agent for polyurethane (PUR) insulation foams in home appliances and for residential and industrial construction. Release of CFCs is an important factor in the depletion of the ozone layer. For CFC-11 the future atmospheric concentrations will mainly depend on the continued release from PUR foams. Little is known about rates and time ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polímeros
سال: 2015
ISSN: 0104-1428
DOI: 10.1590/0104-1428.1944