Flexural Behavior of Rubber-Filled Reinforced Concrete Beams Strengthening with CFRP Sheets

نویسندگان

چکیده

Although there are many advantages to using rubber produce reinforced concrete substrates, still few applications for rubberized substrates like beams, where the mechanical properties of rubber-infused concrete, such as flexural strength, begin decline. On other hand, strengthening constitutes a sizeable portion structural uses externally carbon fiber polymer (CFRP) sheets when used strengthen beams. For this study's adhered were substitute loss strength. The beams split into two groups, each consisting three first group's mixture was included filler (5) % cement weight in form waste tire with size not more than (0.075) mm. Any group always had beam without any external reinforcement, second one layer, and third layers sheet. results indicate that load at crack increases be equal un-rubberized is strengthened layer sheets, it by (20%) sheets. When or layers, failure rises 23.58 42.75 percent, respectively. deflection 88.11 120.24 while falls 2.97 6.01 (load-deflection) curve, decreases symmetrical loads.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Flexural Testing of High Strength Reinforced Concrete Beams Strengthened with CFRP Sheets

The objective of this study is to investigate the effectiveness of externally bonded CFRP sheets to increase the flexural strength of reinforced high strength concrete (HSC) beams. Four-point bending flexural tests to complete failure on six concrete beams, strengthened with different layouts of CFRP sheets were conducted. Three-dimensional nonlinear finite element (FE) models were adopted by A...

متن کامل

Shear strengthening of reinforced concrete beams with CFRP

The current paper reviews existing design guidelines for strengthening beams in shear with carbon fibre reinforced polymer (CFRP) sheets and proposes a modification to Concrete Society Technical Report TR55. It goes on to present the results of an experimental programme which evaluated the contribution of CFRP sheets towards the shear strength of continuous reinforced concrete (RC) beams. A tot...

متن کامل

Flexural Strengthening of Deficient Reinforced Concrete Beams with Post-Tensioned Carbon Composites using Finite Element Modelling

The application of external post-tensioned steel bars as an effective way to strengthen an existing bridge has been so far used in many different countries. In recent decades, however, they have been replaced by bars made from Carbon Fiber Reinforced Polymer (CFRP), as a material with high tensile strength and corrosion resistance, to address several concerns with steel bars such as their appli...

متن کامل

Flexural Behavior of Reinforced HPFRCC Beams

High Performance Fiber Reinforced Cementitious Composite (HPFRCC) materials exhibit strain hardening behavior with multiple cracking under tensile loading. In this paper, experimental and parametric studies are performed to assess the influence of using HPFRCC material instead of normal concrete in reinforced concrete beams. After calibrating the experimental results, the analytical results inc...

متن کامل

Strut Deformation in CFRP-Strengthened Reinforced Concrete Deep Beams

Strut-and-tie model (STM) method evolved as one of the most useful designs for shear critical structures and discontinuity regions (D-regions). It provides widespread applications in the design of deep beams as recommended by many codes. The estimation of bottle-shaped strut dimensions, as a main constituent of STM, is essential in design calculations. The application of carbon fibre reinforced...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: E3S web of conferences

سال: 2023

ISSN: ['2555-0403', '2267-1242']

DOI: https://doi.org/10.1051/e3sconf/202342702021