Flexural Capacity of a New Composite Beam with Concrete-Infilled Tubular Lower Flange

Flexural performance of layered ECC-concrete composite beam

The pseudo strain-hardening behavior of fiber reinforced engineered cementitious composites (ECC) is a desirable characteristic for it to act as a substitute for concrete to suppress brittle failure. The use of ECC in the industry is, however, limited by its high cost. To achieve higher cost/performance ratio, ECC can be strategically applied in parts of a structure that is under relatively hig...

Behavior of Composite Timber-Concrete Beam with CFRP Reinforcement

Assessment of Masonry Infilled Reinforced-concrete Frames with Openings

Original scientific paper Reinforced-concrete (R/C) frames infilled with masonry wall, especially with the presence of an opening, are insufficiently explored structural elements. We have experimentally investigated influence of the opening’s type and position to the lateral response of reinforced-concrete frames with masonry infill. Correction factors, that take into account influence of the o...

Fatigue and Overloading Behavior of Steel-Concrete Composite Flexural Members Strengthened with High Modulus CFRP Materials

Due to corrosion and the continuous demand to increase traffic loads, there is a need for an effective system which can be used to repair and/or strengthen steel bridges and structures. This paper describes an experimental program, recently completed, to investigate the fundamental behavior of steel-concrete composite scaled bridge beams strengthened with new high modulus carbon fiber reinforce...

Retrofitting of Reinforced Concrete Beams with Steel Fiber Reinforced Composite Jackets

In the present study, a new method for retrofitting reinforced concrete beam is introduced in which steel-concrete composite jackets containing steel fiber is used. For this purpose, 75% of the peripheral surface of reinforced concrete beams was initially reinforced using steel plates and bolts, and steel fiber reinforced concrete was used between the steel plates and the peripheral surfaces of...