Flow and mixing processes in a passive mixing microfluidic chip: Parameters’ estimation and colorimetric analysis
نویسندگان
چکیده
منابع مشابه
Investigating Fluid Mixing in Electro-Osmotic Flow Through Passive Micro-Mixers Having Square and Triangle Barriers
Objective: In this article, a numerical study is conducted on mixing of two fluids in the liquid phase with two different concentrations of a chemical species in the electro-osmotic flow. Methods: The base liquid is an electrolyte which flows in a two-dimensional micro-channel having electrically charged walls. Lorentz electric force, which is used as stimulating flow factor, is created by appl...
متن کاملInvestigating Fluid Mixing in Electro-Osmotic Flow Through Passive Micro-Mixers Having Square and Triangle Barriers
Objective: In this article, a numerical study is conducted on mixing of two fluids in the liquid phase with two different concentrations of a chemical species in the electro-osmotic flow. Methods: The base liquid is an electrolyte which flows in a two-dimensional micro-channel having electrically charged walls. Lorentz electric force, which is used as stimulating flow factor, is created by appl...
متن کاملA Study of Flow and Mixing in Bubbly Gas-Liquid Pipe Flow Generated by a Grid
The spreading of a tracer in a bubbly two-phase grid-generated turbulent flow system is studied. In this work both particle image velocimetry (PIV) and planer laser-induced <span style="font-size: 10pt...
متن کاملEffective mixing in a microfluidic chip using magnetic particles.
We present a novel active mixing method in a microfluidic chip, where the controlled stirring of magnetic particles is used to achieve an effective mixing of fluids. To perform mixing, the ferromagnetic particles were embedded and manipulated under the influence of a rotating magnetic field. By aligning the magnetic beads along the magnetic field lines, rod-like structures are formed, functioni...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Fine Chemical Technologies
سال: 2019
ISSN: 2686-7575,2410-6593
DOI: 10.32362/2410-6593-2019-14-5-39-50