Flow Field Simulation and Efficiency Calculation of Muzzle Brake Based on ANSYS Fluent
نویسندگان
چکیده
The development of advanced artillery needs to be combined with simulation means, so, traditional calculation method and the flow field was employed calculate efficiency a largecaliber muzzle brake we designed, results achieved by these two methods were 47.8% 49.3%, respectively. Further, overpressure value 1 m away from obtained through simulation, far-field calculated using blast wave attenuation equations. result suggests that designed has little harmful impact. This paper provides an intuitive efficiency, also, it theoretical support for research high personnel protection onboard.
منابع مشابه
fabrication of new ion sensitive field effect transistors (isfet) based on modification of junction-fet for analysis of hydronium, potassium and hydrazinium ions
a novel and ultra low cost isfet electrode and measurement system was designed for isfet application and detection of hydronium, hydrazinium and potassium ions. also, a measuring setup containing appropriate circuits, suitable analyzer (advantech board), de noise reduction elements, cooling system and pc was used for controlling the isfet electrode and various characteristic measurements. the t...
Modeling particle-loaded single fiber efficiency and fiber drag using ANSYS–Fluent CFD code
In this paper, we present a methodology for simulating pressure drop and collection efficiency of a filter medium during instantaneous particle loading using the ANSYS–Fluent CFD code, enhanced with inhouse subroutines. The simulations are comprised of a numerical solution of the Stokes equations for obtaining the air flow field, and Lagrangian particle tracking, for determining the particle co...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
effect of sub-grid scales on large eddy simulation of particle deposition in a turbulent channel flow
چکیده ندارد.
15 صفحه اولFinite Element Analysis Of Disc Brake By ANSYS Workbench
The brakes must be strong enough to stop the vehicle within a minimum distance in an emergency. The driver must have proper control over the vehicle during emergency braking and vehicle must not skid. The brakes must have good antedate characteristics their effectiveness should not decrease with prolonged application and thus it demand that the cooling of the brakes should be very efficient. Fo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S web of conferences
سال: 2021
ISSN: ['2555-0403', '2267-1242']
DOI: https://doi.org/10.1051/e3sconf/202126102022