Flow lithography in ultraviolet-curable polydimethylsiloxane microfluidic chips
نویسندگان
چکیده
منابع مشابه
Construction of microfluidic chips using polydimethylsiloxane for adhesive bonding.
A thin layer of polydimethylsiloxane (PDMS) prepolymer, which is coated on a glass slide, is transferred onto the embossed area surfaces of a patterned substrate. This coated substrate is brought into contact with a flat plate, and the two structures are permanently bonded to form a sealed fluidic system by thermocuring (60 degrees C for 30 min) the prepolymer. The PDMS exists only at the conta...
متن کاملAn ultraviolet-curable mold for sub-100-nm lithography.
We describe a novel UV-curable mold that is stiff enough for replicating dense sub-100-nm features even with a high aspect ratio. It also allows for flexibility when the mold is prepared on a flexible support such that large area replication can be accomplished. The composite material of the mold is inert to chemicals and solvents. The surface energy is made low with a small amount of releasing...
متن کاملStop-flow lithography in a microfluidic device.
Polymeric particles in custom designed geometries and with tunable chemical anisotropy are expected to enable a variety of new technologies in diverse areas such as photonics, diagnostics and functional materials. We present a simple, high throughput and high resolution microfluidic method to synthesize such polymeric particles. Building off earlier work that we have done on continuous flow lit...
متن کاملNon-polydimethylsiloxane devices for oxygen-free flow lithography.
Flow lithography has become a powerful particle synthesis technique. Currently, flow lithography relies on the use of polydimethylsiloxane microchannels, because the process requires local inhibition of polymerization, near channel interfaces, via oxygen permeation. The dependence on polydimethylsiloxane devices greatly limits the range of precursor materials that can be processed in flow litho...
متن کاملPolydimethylsiloxane based microfluidic diode
In this paper, we present a novel elastomer-based microfluidic device for rectifying flow. The device is analogous to an electronic diode in function since it allows flow in one direction and stops flow in the opposing direction. The device is planar, in-line and can be replica molded via standard soft lithography techniques. The fabrication process is outlined in detail and follows a simple pr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Biomicrofluidics
سال: 2017
ISSN: 1932-1058
DOI: 10.1063/1.4982698