Flow pattern determination for circular staggered cylinders in cross flow using CFD
نویسندگان
چکیده
منابع مشابه
Lower Mode Response of Circular Cylinders in Cross-Flow
Transverse amplitude responses ofa circular cylinder in cross-flow were determined as a function of reduced velocities for a variety of spring constants and damping coefficients. Maxima were found at reduced velocities of 5 and 16, and were of comparable amplitude. The first resonance, designated the "fundamental mode, " was due to normal vortex street excitation of the spring-mass system. The ...
متن کاملWake transition in the flow around two circular cylinders in staggered arrangements
The wake transition of the flow around two circular cylinders placed in staggered arrangements with fixed streamwise separation of 5D and cross stream separation varying from 0D to 3D has been studied. The wake transition is compared to that of a single isolated cylinder. Linear stability analysis utilising Floquet theory and direct numerical simulations, using the spectral/hp element method we...
متن کاملFlow past two tandem circular cylinders using Spectral element method
In this paper, flow past around two circular cylinders which are tandem arranged at a Reynolds number of 200 is numerically investigated by spectral element method. To validate the numerical method for incompressible Navier–Stokes equations, the benchmark problem of flow over a single circular cylinder is employed, with the numerical results in a good agreement with the available literatures. T...
متن کاملTwo interacting cylinders in cross flow.
Cylindrical structures in a group are frequently seen on land and in the ocean. Mutual flow interaction between the structures makes the wake very excited or tranquil depending on the spacing between the structures. The excited wake-enhancing forces in some cases cause a catastrophic failure of the structures. This paper presents results of an experimental investigation of Strouhal number (St),...
متن کاملCFD Analysis of Electrolyte Flow Pattern in Pulse ECM and to Optimize MRR for Circular Tool
ECM emerges out to be one of the major non conventional machining techniques based on Faraday‟s laws of electrolysis, highly efficient due to its zero tool wear characteristic. Occurrence of passivation is the major problem faced in ECM. In the present work, study of the flow pattern of electrolyte has been performed so that, the machining variable distribution can be predicted accurately thus ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MOJ Civil Engineering
سال: 2019
ISSN: 2572-8520
DOI: 10.15406/mojce.2019.05.00160