Flow Structures Inside a Rotor-Stator Cavity

Experimental and Numerical Investigation of Turbulent Air Flow Behaviour in a Rotor-stator Cavity

The present work considers the turbulent air flow inside an annular high speed rotor-stator cavity opened to the atmosphere at the periphery. The interdisk-spacing is sufficiently large so that the boundary layers developed on each disk are separated and the flow belongs to the regime IV of Daily and Nece (1960). In such a system, the solid body rotation of the core predicted by Batchelor in ca...

Stator Core Stator Winding in Slots Rotor

Induction machines are perhaps the most widely used of all electric motors. They are generally simple to build and rugged, offer reasonable asynchronous performance: a manageable torque-speed curve, stable operation under load, and generally satisfactory efficiency. Because they are so widely used, they are worth understanding. In addition to their current economic importance, induction motors ...

Nusselt Number Measurement of Air Flow between Grooved Rotor and Stator of a Generator

In this article, turbulent flow heat transfer in the air gap between rotor and stator of a generator under nonhomogeneous heat flux is studied experimentally. The rotor consists of four symmetrical triangular grooves. The stator surface is smooth and does not include any grooves. The relative heat flux between the rotor and the stator is 1 to 3. Temperature and heat flux are measured locally at...

Nusselt Number Measurement of Air Flow between Grooved Rotor and Stator of a Generator

In this article, turbulent flow heat transfer in the air gap between rotor and stator of a generator under nonhomogeneous heat flux is studied experimentally. The rotor consists of four symmetrical triangular grooves. The stator surface is smooth and does not include any grooves. The relative heat flux between the rotor and the stator is 1 to 3. Temperature and heat flux are measured locally at...

High-order LES of turbulent heat transfer in a rotor–stator cavity