FLOW VISUALIZATION IN HYDRAULIC HOLDING VALVE
نویسندگان
چکیده
منابع مشابه
Flow-Force Analysis in a Hydraulic Sliding-Spool Valve
Original scientific paper The necessary forces for the control of a hydraulic sliding-spool valve are normally determined by the stationary axial momentum forces of the oil flow through a valve. These forces increase with an increase in the volume flow and the pressure difference. Because of the limited actuating-force potential of normal electromechanical actuators, the direct actuation of con...
متن کاملFlow Visualization Around a Non - Circular Tube
The flow behavior around a cam shaped tube in cross flow has been investigated experimentally using flow visualization and pressure distribution measurement. The range of attack angle and Reynolds number based on an equivalent circular diameter are within 0 ≤ α ≤ 360˚ and 2 x 104 < Reeq < 3.4 x 104, respectively. The pressure drag features are clarified in relation to the flow behavior around t...
متن کاملElectro-hydraulic Servo Valve Systems
Hydraulic systems driven by servo valves provide highly accurate control over enormous forces. A servo valve system consists of a transducer, a servo amplifier, a servo valve, and an actuator with a connected load. It is a closed-loop system used for the precise control of the output (load) parameter, such as position, velocity, or force, in response to a command signal. The output is converted...
متن کاملInvestigation of the Flow and Cavitation in a Butterfly Valve
Since knowledge on hydrodynamic torque of a butterfly valve is very important for butterfly valve design, its hydrodynamic torque is investigated in this paper. In reality, the investigation of the loss coefficient and torque from some experiments will take a long time and a lot of money. This paper presents a statistical study of the flow past the butterfly valve in a static analysis using com...
متن کاملSimulation of the cavitating flow in a model oil hydraulic spool valve using different model approaches
The contribution compares results of Large Eddy Simulations of the cavitating flow in a model oil hydraulic spool valve using an Euler-Euler and a one-way coupled EulerLagrange model. The impact of the choice of the empirical constants in the Kunz cavitation model is demonstrated. Provided these are chosen appropriately the approach can yield reasonable agreement with the corresponding experime...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the JFPS International Symposium on Fluid Power
سال: 1996
ISSN: 2185-6303
DOI: 10.5739/isfp.1996.437