Flowability of Resin Mortar
نویسندگان
چکیده
منابع مشابه
Factors Influencing Feed Ingredient Flowability
Animal-based food products play a significant role in the current U.S. diet. In 2003, the total meat consumption per capita was 90.5 kg/year [U.S. Department of Agriculture (USDA) 2005]. Since the U.S. has a high consumption of animal-based food products, the animal feed ingredients are fundamentally important. The ingredients can affect not only the quality of the animal-based food products, b...
متن کاملMechanical Properties of Epoxy Resin Mortar with Sand Washing Waste as Filler
The objective of this study was to investigate the potential use of sand washing waste as filler for epoxy resin mortar. The mechanical properties of four series of mortars containing epoxy binder at 10, 15, 20, and 25 wt. % mixed with sand blended with sand washing waste filler in the range of 0-20 wt. % were examined. The compressive and flexural strength increased with the increase in epoxy ...
متن کاملFlowability Parameters for Chopped Switchgrass, Wheat
A direct shear cell to measure the shear strength and flow properties of chopped switchgrass, wheat straw and corn stover was designed, fabricated, and tested. The shear strength measured at various normal stresses was found to be significantly different. Shear strength for all three chopped biomass types measured at a particular normal stress was not significantly different. The R value of the...
متن کاملComparison of different flowability tests for powders for inhalation
A series of placebo powders for inhalation was characterized regarding bulk density and powder flowability using different techniques. The powders were of the ordered mixture type and were prepared by mixing a pharmaceutical carrier grade of lactose with different fractions of intermediate sized and fine (i.e., micronized) lactose. A modified Hausner Ratio was obtained by measurement of the pou...
متن کاملPreparation of Sulfur Mortar from Modified Sulfur
Mixtures of mineral aggregate and modified sulfur, wherein the modified sulfur functions as a binder, are termed sulfur concretes or sulfur mortars depending on the form of the mineral aggregate. Molten sulfur reacted with olefinic additive, at 130-140 ºC, and then mixed with preheated filler and aggregates. Sulfur mortar samples were prepared by mixing 32 % molten sulfur, 10 % filler and 5...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1977
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.26.791