Fluxless Solder Joining Using Alkane.
نویسندگان
چکیده
منابع مشابه
Fracture Toughness Study on Bulk Metallic Glasses and Novel Joining Method Using Bulk Metallic Glass Solder
The fracture toughness of three new compositional variants of the Zr-Ti-Be-LTM (Late Transition Metal) family of bulk metallic glasses (BMG’s) are studied in the as-cast and annealed condition. Quaternary Zr-Ti-Cu-Be alloys consistently had linear elastic fracture toughness values greater than 80 MPa·m, while Vitreloy 1, a Zr-Ti-Cu-Ni-Be alloy, had an average fracture toughness of 48.5 MPa·m wi...
متن کاملEffect of Thermal Aging on the Impact Strength of Soldered Bumps under Formic Acid Atmosphere
In this study, we have investigated the effect of thermal aging on impact strength of Sn-Ag-Cu solder bumps in fluxless soldering process using formic acid atmosphere. We conducted impact tests on as-reflowed and thermally-aged solder bumps, which were fabricated on either formic acid atmosphere or a liquid flux. The results indicated that the morphology of the intermetallic compound layers in ...
متن کاملSolder Bumping - A Flexible Joining Approach for the Precision Assembly of Optoelectronical Systems
For microoptics and microsystem assembly, solder bumping is introduced as a flexible and high precise joining alternative to adhesive bonding, especially if adhesives limit the system performance in terms of long term, high temperature, vacuum or UV stability. The bumping technology, which is based on jetting the liquid solder onto wetting surfaces, can be parameter optimised to work in complex...
متن کاملThe Impact of Reflowing A Pbfree Solder Alloy Using A Tin/Lead Solder Alloy Reflow Profile On Solder Joint Integrity
The electronics industry is undergoing a materials evolution due to the pending Restriction of Hazardous Substances (RoHS) European Directive. Printed wiring board laminate suppliers, component fabricators, and printed wiring assembly operations are engaged in a multitude of investigations to determine what leadfree (Pbfree) material choices best fit their needs. The size and complexity of Pbfr...
متن کاملFluxless Die Attach by Activated Forming Gas
Eutectic god-tin (Au80Sn20) is widely used as the die-attach material for making radio-frequency (RF) and microwave devices. The metallic bonding is typically achieved by soldering using a gold-tin preform in a forming gas containing hydrogen (H2) and nitrogen (N2) to a peak temperature at 300 ̊C. The performance and reliability of the devices are strongly dependent on the quality of the die-att...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of Japan Institute for Interconnecting and Packaging Electronic Circuits
سال: 1998
ISSN: 1884-1201,1341-0571
DOI: 10.5104/jiep1995.13.103