Foam glass processing using a polishing glass powder residue
نویسندگان
چکیده
منابع مشابه
High Porosity Metallic Glass Foam: A Powder Metallurgy Route
A powder metallurgy route to the fabrication of metallic glass foam is introduced. The method involves consolidating metallic glass powder blended with blowing agent particulates to produce expandable precursors, capable of yielding foams with porosities as high as 86%. The foams are found to inherit the strength of the parent metallic glass, and to be able to deform heavily toward full densifi...
متن کاملAcid polishing of lead glass
Purpose: The polishing of cut lead glass crystal is effected through the dowsing of the glass in a mixture of two separate acids, which between them etch the surface and as a result cause it to be become smooth. In order to characterise the resultant polishing the rate of surface etching must be known, but when this involves multicomponent surface reactions it becomes unclear what this rate act...
متن کاملLaser application for optical glass polishing
Fidel Vega Núria Lupón Jesús Armengol Cebrian Ferran Laguarta Universitat Politècnica de Catalunya Departament d’ Òptica I Optometria C/Violinista Vellsolà 37 08222 Terrassa, Spain E-mail: [email protected] Abstract. Rapid generation of large area polished optical surfaces by high-power CO2 laser irradiation is shown. Results focus on glasses with high expansion coefficients (a>1025/°C) conventio...
متن کاملSlurry particle size evolution during the polishing of optical glass.
The particle size distribution of aqueous metal-oxide slurries can evolve during the polishing of optical glass in response to changes in mechanical and chemical process factors. The size-evolution phenomenon and its consequences were systematically studied in a planar continuous-polishing process. The concurrent application of electrokinetic techniques to characterize common optical shop mater...
متن کاملDeterministic Microgrinding, Lapping, and Polishing of Glass-Ceramics
40 LLE Review, Volume 97 Introduction Glass-ceramics are attractive structural materials due to their good mechanical properties, chemical stability at higher temperatures, and tailored microstructures via appropriate heat treatments. In the cold working of glass-ceramics, several options are available: loose-abrasive grinding (lapping, at fixed nominal pressure) or deterministic microgrinding ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Ceramics International
سال: 2013
ISSN: 0272-8842
DOI: 10.1016/j.ceramint.2012.12.104