Force and Slip Displacement of Fibre Cemboard Panels Subjected To Four-Point Bending Test
نویسندگان
چکیده
For many years, fibre cemboard has been widely used in the construction industry. This material advantages, including a long-life span, ease of installation and low maintenance, which can reduce cost maintenance. However, due to its limitation being unable support heavy loads, it is only suitable for lightweight floor system. Therefore, panel introduced. Basically, consists several layers that stack together using special bond mechanism. study aims investigate flexural capacity slip displacement panels with different mechanisms (polyurethane glue, steel bolts polyurethane glue + bolts) spacings (50 mm, 75 100 150 200 mm). The specimens were fabricated size 305 mm width, 1220 span 2@16 thickness. four-point bending test was carried out Universal Testing Machine (UTM) yield force-slip curves.The results experimental testing indicate mechanism an apparent impact on displacement. bonded by have best performance. Meanwhile, spacing found control most than capacity. Close distance may increase stiffness appreciably contributes better optimum 50 while should and100 spacings. hold stress concentration before detachment. When fails, resume function resist until rapture.
منابع مشابه
An Optical System to Monitor the Displacement Field of Glass-fibre Posts Subjected to Thermal Loading
Endocanalar posts are necessary to build up and retain coronal restorations but they do not reinforce dental roots. It was observed that the dislodgement of post-retained restorations commonly occurs after several years of function and long-term retention may be influenced by various factors such as temperature changes. Temperature changes, in fact, produce micrometric deformations of post and ...
متن کاملCluster Analysis of Acoustic Emission Signals for Carbon/Epoxy Composite in Four-point Bending Test (RESEARCH NOTE)
Due to the extensive use of composites in various industries and the fact that defects reduce ultimate strength and efficiency during operation, detection of failures in composite parts is very important. The aim of this paper is to use Acoustic Emission (AE) non-destructive method in four-point bending test of carbon/epoxy composite to analyze and examine the failure mechanisms. This method is...
متن کاملA biomechanical analysis of plate fixation using unicortical and bicortical screws in transverse metacarpal fracture models subjected to 4-point bending and dynamical bending test
In the published literature there are controversial data to the biomechanical stability of monocortical comparing to the bicortical fixation of metacarpal fractures. The aim of this study was to compare the biomechanical stability of monocortical and bicortical locking osteosynthesis in quasi-static and dynamic 4-point bending tests of composite third metacarpal bone (4th Gen third metacarpal, ...
متن کاملBending stiffness of the lumbar spine subjected to posteroanterior manipulative force.
This study measured the bending stiffness of the spine when it is subjected to posteroanterior mobilization force. The lumbar spine was modeled as an initially curved beam column supported over the rib cage and the pelvis. Posteroanterior mobilization was assumed to be three-point bending of the beam. The mobilization force was measured by the mounting of a force plate onto the manipulation cou...
متن کاملPropagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads
Due to the mismatch of mechanical properties in composite laminates, propagation of delami-nation is considered as a severe damage mechanism in beams with various lay-up configurations. Delamination can be generated due to matrix cracking propagation or it can also be initiated due to the manufacturing process before using composite beams. Using a micromechanics model, this study is aimed to in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Integrated Engineering
سال: 2022
ISSN: ['2229-838X', '2600-7916']
DOI: https://doi.org/10.30880/ijie.2022.14.05.028