Forced Convection Heat Transfer Analysis through Dimpled Surfaces with Different Arrangements
نویسندگان
چکیده
منابع مشابه
An Investigation into Forced Convection Heat Transfer through Porous Media
Theoretical and experimental investigations of forced convection heat transfer from a heated flat plate embedded in porous media with a constant heat flux had been carried out in the present work. The experimental investigation included a set of experiments carried out to study the effect of Reynolds number and heat flux on the temperature profile and local Nusselt number. The investigation cov...
متن کاملForced Convection Heat Transfer of Non-Newtonian Fluids Through Circular Ducts
The Galerkin finite element method is used to solve the three dimensional continuity, momentum and energy equations for laminar Newtonian and power-law model non-Newtonian flow through horizontal circular tube. The governing equations are non-dimensionalized with respect to specific variables and converted into algebraic equations using appropriate elements. To accelerate convergence a combinat...
متن کاملForced Convection Heat Transfer of Non-Newtonian Fluids Through Circular Ducts
The Galerkin finite element method is used to solve the three dimensional continuity, momentum and energy equations for laminar Newtonian and power-law model non-Newtonian flow through horizontal circular tube. The governing equations are non-dimensionalized with respect to specific variables and converted into algebraic equations using appropriate elements. To accelerate convergence a combinat...
متن کاملHeat Transfer Study of Perforated Fin under Forced Convection
Fins are protrusions on a heat transfer surface to augment heat transfer rate from it. The increase in area exposed to convection in case of finned surfaces results in increased heat transfer rate. In this study heat transfer characteristics of a pin fin with perforation is numerically analyzed. A pin fin is fabricated and experiments are done under forced convection conditions. The experimenta...
متن کاملAnalysis of variance of nanofluid heat transfer data for forced convection in horizontal spirally coiled tubes
In the present study, an experimental study is carried out to investigate the effect of adding Al and Cu nanoparticles to the base fluid (water) on the heat transfer rate in a spirally coiled tube. The spirally coiled tube is fabricated from the straight copper tube with the inner and outer coil diameters of 100 and 420 mm, respectively. The experiments have been done for water and two types of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: American Journal of Energy Engineering
سال: 2015
ISSN: 2329-1648
DOI: 10.11648/j.ajee.20150303.12