Forces in hard turning of 51CrV4 with wiper cutting tool
نویسندگان
چکیده
منابع مشابه
Modeling of Cutting Forces Under Hard Turning Conditions Considering Tool Wear Effect
Quantitative understanding of cutting forces under hard turning conditions is important for thermal modeling, tool life estimation, chatter prediction, and tool condition monitoring purposes. Although significant research has been documented on the modeling of forces in the turning operation in general, turning of hardened materials involves several distinctive process conditions, including neg...
متن کاملCutting Forces in Hard Turning Comprising Tool Flank Wear and Its Implication for the Friction between Tool and Workpiece
Original scientific paper In this paper, the orthogonal cutting force model is proposed comprising forces due to flank wear in addition to the forces for chip formation during the hard turning of round bar made of steel 60WCrV7 hardened at 55+2HRc. Cutting force model includes two tool conditions: perfectly sharp tool with VBB = 0 and tool with maximum permissible flank wear VBBmax. Based on cu...
متن کاملThe Effectiveness of Ceramic Wiper Tool in Turning of Monel K500
In this study, turning operation of Monel K500 copper-nickel super-alloy was evaluated. Ceramic cutting tools with two different cutting noses (conventional and wiper) were utilized. At first, the experimental tests were designed by using central composite design method. After implementation of the tests, the statistical models for output data (surface roughness, cutting force, and flank wear) ...
متن کاملThe Effectiveness of Ceramic Wiper Tool in Turning of Monel K500
In this study, turning operation of Monel K500 copper-nickel super-alloy was evaluated. Ceramic cutting tools with two different cutting noses (conventional and wiper) were utilized. At first, the experimental tests were designed by using central composite design method. After implementation of the tests, the statistical models for output data (surface roughness, cutting force, and flank wear) ...
متن کاملCutting Disturbances in Hard Turning Process
Assumption of cutting disturbances in hard turning process (caused by variations in depth of cutting, high passive force Fp or small tool nose radius) could be confirmed with several indicators. These indicators can be monitored during turning process(forces, vibrations, sound, etc.) or after process has been finished (roughness, temperature, wear, etc). Variation of depth of cutting as well as...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tsinghua Science and Technology
سال: 2006
ISSN: 1007-0214
DOI: 10.1016/s1007-0214(06)70226-7