Foreign object damage of rotating fan blades.

Erosion and Foreign Object Damage of Thermal Barrier Coatings

Thermal barrier coating are perceived as an enabling technology to increase the performance of, improve efficiency within, and lower the emissions from, modern gas turbines. To fully utilise this capability one has to be able to accurately predict the life of these coatings under conditions relevant to gas turbine service. This paper addresses the failure of TBC systems as a result of erosion a...

Multipath-dominant, pulsed doppler analysis of rotating blades

We present a novel angular fingerprinting algorithm for detecting changes in the direction of rotation of a target with a monostatic, stationary sonar platform. Unlike other approaches, we assume that the target’s centroid is stationary, and exploit doppler multipath signals to resolve the otherwise unavoidable ambiguities that arise. Since the algorithm is based on an underlying differential t...

Determination of Angle of Attack (AOA) for Rotating Blades

Simulation of Mist Film Cooling on Rotating Gas Turbine Blades

Film cooling technique has been successfully applied to gas turbine blades to prevent it from the hot flue gas. However, a continuous demand of increasing the turbine inlet temperature to raise the efficiency of the turbine requires continuous improvement in film cooling effectiveness. The concept of injecting mist (tiny water droplets) into the cooling fluid has been proven under laboratory co...

Influence of Chord Lengths of Splitter Blades on Performance of Small Axial Flow Fan

On the basis of small axial fan with five blades, 6 types of small axial flow fans with different chord lengths splitter blades were designed. Numerical simulation of 6 fan models with splitter blades and prototype fan were done by using Fluent. Based on the obtained simulation results, internal flow characteristics and aerodynamic noise were analyzed and compared. It indicates that: splitter b...