Formation and characteristics of the apatite layer on plasma-sprayed hydroxyapatite coatings in simulated body fluid
نویسندگان
چکیده
منابع مشابه
Formation and characteristics of the apatite layer on plasma-sprayed hydroxyapatite coatings in simulated body fluid.
Plasma-sprayed hydroxyapatite (HA) coatings were incubated in simulated body fluids (SBFs) for different periods of time to investigate the nucleation and growth of apatite on their surface. The layer that formed was recognized as having similarities to bone apatite because it is poorly crystallized, non-stoichiometric or calcium deficient, and contains carbonate and magnesium. Scanning electro...
متن کاملEffect of coating time on the corrosion behavior of ceramic coatings containing hydroxyapatite nanoparticles by plasma electrolytic oxidation method on AZ31 Mg alloy in simulated body fluid
In this study, the effect of coating time on the microstructure and corrosion behavior of AZ31 Mg alloy coated by plasma electrolytic oxidation (PEO) method has been investigated. For this purpose, phosphate-based electrolyte containing hydroxyapatite nanoparticles was used at different times of 5, 10 and 15 minutes. The surface properties and chemical composition of the coatings were investiga...
متن کاملEffect of Heat Treatment on Characteristics of Plasma Sprayed Hydroxyapatite Coatings
Bioactive hydroxyapatite (HA)-coated implants plasma sprayed on Ti6Al4V substrates have been widely used in load-bearing applications because of their biocompatibility and their intimate contact with bone. The improvement of the characteristics of HA coatings is concerned. The purpose of this work was to evaluate corrosion behavior and bond strength of HA coatings after post-deposition heat tre...
متن کاملCharacterization of Plasma Sprayed Hydroxyapatite Coatings on AISI 316L SS and Titanium Substrate and their Corrosion Behavior in Simulated Body Fluid
In order to increase the bone bioactivity of metallic implants, hydroxyapatite (HA: Ca10(PO4)2(OH)6) is often coated on their surface so that real bond with surrounding bone tissue can be formed. In present study, HA coatings were deposited on AISI 316L SS and titanium using shrouded plasma spray process. The coated specimens were subjected to X-ray diffraction (XRD) analysis, field emission sc...
متن کاملSuspension Plasma Sprayed Titanium Oxide and Hydroxyapatite Coatings
The paper aims at development of TiO2, Ca5(PO4)3OH (hydroxyapatite, HA) and their multilayer coatings onto stainless steel, titanium and aluminum substrate using suspension plasma spraying. The total thickness of the coatings was in the range 10 to 150 μm. The suspension on the base of distilled water, ethanol and their mixtures was formulated with the use of fine commercial TiO2 pigment crysta...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Biomaterials
سال: 1997
ISSN: 0142-9612
DOI: 10.1016/s0142-9612(97)00022-7