Formation of Nitrogen Mono Oxide (NO) during Iron Ore Sintering Process
نویسندگان
چکیده
منابع مشابه
Identification the Content of the Windbox Dust Related to the Formation of PCDD/Fs during the Iron Ore Sintering Process
This study measured the contents of the ionic and elemental constituents, and the chemical compounds containing in windbox (WB) dusts collected from a commercial iron ore sintering plant, then the results were used to identify possible PCDD/Fs formation pathways in the WB. We found that the abundance in both KCl and NaCl may provide a suitable condition for de novo synthesis of PCDD/Fs in the W...
متن کاملInfluence of Preformation Process on Combustibility of Biochar and its Application in Iron Ore Sintering
A study was carried out into the use of preformation process to prepare biochar for replacing coke breeze in iron ore sintering. Two types of preformation process, thermo-compression process (TCP) and normal temperature process (NTP), were adopted. Results show that preformation contributed to improving the density of both raw biomass and biochar. Recommended preformation parameters for TCP wer...
متن کاملAtmospheric emission of polychlorinated naphthalenes from iron ore sintering processes.
Iron ore sintering processes constitute significant sources of dioxins, and studies have confirmed a close correlation between polychlorinated naphthalenes (PCNs) and dioxin formation. Thus, iron ore sintering processes are thought to be a potential source of PCNs, although intensive investigations on PCN emissions from sintering processes have not been carried out. Therefore, the aim of the pr...
متن کاملEffect of Using Oxygen-Enriched Gas during Induration Process of Iron Ore Pellets Containing Solid Fuel
In this research, the effects of oxygen injection during the induration process were studied in order to improve the quality specifications and increase the rate of production of the iron oxide pellets. Several experiments were carried out in palletizing pilot plant in different conditions of oxygen injection. The results suggested that if only the extra oxygen was injected into the furnace in ...
متن کاملFactors Controlling High-temperature Zone Resistance to Airflow during Iron Ore Sintering
A fundamental study was carried out on the high-temperature zone flow resistance during iron ore sintering. In present work, firstly, quartz sand was used to replace iron ores to investigate the impact of temperature if bed structure has no change; then a three-layer bed structure was used to explore the primary factors controlling high-temperature zone structure for airflow. The zone where tem...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2018
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.isijint-2017-370